Operational Instructions; Setting The Clock; Time Function; +30 Sec - Impecca CM-1396 User Manual

OPERATIONAL INSTRUCTIONS

• When the oven is first plugged in, the unit will beep and the display will show "CLOCK" and "12:00".
• While cooking, press the STOP/CANCEL button to pause the program, then press the START button to
resume. Press STOP/CANCEL twice to cancel program
• If the cooking time is 2 minutes or more, after cooking ends, the screen will display "Fan" for 1 minute,
then display "End". But if the cooking time is less than 2 minutes, after cooking ends, the screen will dis-
play "End" and sound every two minutes. After pressing the STOP/CANCEL button or opening the door,
the oven returns to standby mode.
• The electronic control system of the microwave oven has an automatic cooling feature. If using micro-
wave, convection or combination cooking mode longer than two minutes, the oven fan will automati-
cally operate to cool the oven post cooking time. This is normal.

SETTING THE CLOCK

The clock can be set to either 12-hour or 24-hour time. By pressing the CLOCK/TIMER button for 3 seconds
to choose the 24-hour clock, press it again to choose the 12-hour clock. Use the keypad to enter the current
time. Then press CLOCK/TIMER again, or the START button, to confirm the current time.

TIME FUNCTION

In standby mode or during cooking, press the CLOCK/TIMER button once. Use the keypad to enter desired
duration, max duration is 99 minutes and 99 seconds. Press START or CLOCK/TIMER to begin the timer.
While cooking, and during countdown, press CLOCK/TIMER to display time. When the timer ends, the unit
will finish with a buzzer. Press STOP/CANCEL anytime during countdown to cancel the timer.

+30 SEC.

The +30 Sec. feature is designed for convenience by immediately starting the microwave at 100% power for
30 seconds for easy quick cooking and food warm up. Pressing +30 Sec. successively will add 30 seconds of
cooking time for each press.

MICROWAVE COOKING

1. In standby mode, press the MICRO. button repeatedly to select the power level beginning at 100%.
Level 10
Power 100%
Display P100
9 8 7
90% 80% 70%
P90 P80 P70
6 5 4
60% 50% 40%
P60 P50 P40
9
3 2 1
30% 20% 10%
P30 P20 P10