Advertisement
Install the assembled surge protector into the hole (see
below).
Figure 8: Install surge protector
Ensure the gasket that was installed in step 11 is between the
surge-protector and the enclosure (on the inside of the
enclosure).
Secure the surge protector to the enclosure with the provided
split washer and hex nut.
View of the installed surge protector from the inside of the enclosure
(see below). ABB enclosure 6413 is shown.
Figure 9: Inside the enclosure
Attach the ground cable to the ground post (see number 2 in
the picture below).
Route the cable assembly via mountable cable ties attached to
the enclosure (see number 1, below).
8 | WI-FI ANTENNA KIT | 2106123MNAD
Advertisement
