Sony HT-A5000M Help Manual page 78

Help Guide
Sound Bar
HT-A5000/A5000M
Enjoying Surround Effect (SOUND FIELD)
You can turn the surround effect on or off to suit sound sources.
Press SOUND FIELD to select the setting.
1
The setting appears on the TV screen.
[Sound Field: Effect On]: The sound is output with the surround effect. This setting is suitable for experiencing
the surround sound with presence regardless of the genre.
[Sound Field: Effect Off]: The sound is output without the surround effect. This setting is suitable for listening
to high-resolution audio sound or news.
Note
You cannot change the setting in the following conditions even if you press SOUND FIELD.
The BLUETOOTH device is connected in BLUETOOTH transmission mode.
A test tone is emitted.
The setting does not appear on the TV screen while the TV input is selected. In this case, you can check the setting in the front
panel display.
Depending on the source, such as Dolby Atmos, this setting is always set to ON and cannot be changed.
Hint
You can select the type of the surround effect in
You cannot change the setting of [Sound Field Setting] when
Sound Mapping] is set to [On].
[Setup] - [Advanced Settings] - [Audio Settings] - [Sound Field Setting].
[Setup] - [Advanced Settings] - [Audio Settings] - [360 Spatial
5-029-482-11(3) Copyright 2021 Sony Corporation
78