Axis Q6052 User Manual page 14

AXIS Q6052 PTZ Dome Network Camera
Access the Product
The image shows an example of a focus recall area marked with a white square. As soon as the camera detects the focus recall area, the
camera recalls the previously set focus. This means that, in this example, the focus is set on the car regardless of zoom factor.
How to add a focus recall area
1. Pan, tilt and zoom into the area where you would like to have focus.
2. Set the focus, either use the autofocus or adjust manually by using the focus bar.
3. Click on the focus recall button
How to remove a focus recall area
1. Pan, tilt and zoom to enter the focus recall area.
2. Click on the focus recall button
is removed.
. The button toggles from plus to minus to show that the focus recall area is added.
. The button toggles from minus to plus to show that the focus recall area
14