Brother GTX600SB Instruction Manual page 208

(4) Remove the upper case of a new print head.
(5) Remove the caps from the new print head.
<TIPS>

Remove all the four caps when replacing a color or white side print head.
When replacing an OR/GR side print head, remove the two caps 1·5 and 2·6 on top of the head cover.
Head A side 1
Head B side 5
Cap
(6) Remove each tube from the print head to be replaced with a new one. Then attach each of the new caps which are
removed from a new print head to each tube, while exercising care to prevent any ink from being spilled.
<IMPORTANT>

Care is needed in preventing any ink from being spilled from each tube. If the ink is dripping, wipe off the dripping ink.
<TIPS>

Two tubes are connected to an OR/GR head.
<NOTE>

For a proper work operation, be sure to wear the printer-provided gloves.
Cap
(7) Remove the latch on the carriage board cover and open the cover.
Latch
Precautions to keep good printing quality/use printer over the long term
2 3 4
6 7 8
Tube
Color/White side
3 4
1 2
7 8
5 6
208
OR/GR side
3 4
1 2
7 8
5 6
X1125
Print head
Tube
X1005