Dell Inspiron 3020 Service Manual page 66

Table 11. System setup options—Security menu (continued)
Security
Absolute®
UEFI Boot Path Security
UEFI Boot Path Security
Admin Password
System Password
Internal HDD-0 Password
Password Configuration
Password Change
UEFI Capsule Firmware Updates
PTT Security
PTT On
Clear
PPI ByPass for Clear Commands
Absolute®
Admin Setup Lockout
Master Password Lockout
SMM Security Mitigation
Table 12. System setup options—Passwords menu
Passwords
Admin Password
System Password
Password Configuration
Upper Case Letter
Lower Case Letter
66 System setup
Enable or disable the BIOS module interface of the optional Absolute
Persistence Module service from Absolute® Software.
Default: Enable Absolute
Configures whether the system will prompt the user for the admin password (if
set) when booting to a UEFI boot path device from the F12 boot menu.
Default: Always Except Internal HDD is selected
Set, change, or delete the administrator password.
Set, change, or delete the system password.
Set, change, or delete the internal hard-disk drive password.
Control the minimum and maximum number of characters allowed for Admin
and System passwords.
Enable or disable changes to the System and Hard Disk passwords when an
administrator password is set.
Enable or disable BIOS updates through UEFI capsule update packages.
Enable or disable Platform Trust Technology (PTT) visibility to the operating
system.
Default: Disabled
Enable or disable the TPM Physical Presence Interface (PPI). When enabled,
this setting will allow the OS to skip BIOS PPI user prompts when issuing the
Clear command. Changes to this setting take effect immediately.
Default: Disabled
Enable or disable the BIOS module interface of the optional Absolute
Persistence Module service from Absolute® Software.
Default: Enable Absolute
Enable to prevent users from entering Setup when an Admin Password is set.
Disables the master password support. Hard Disk passwords need to be
cleared before changing the setting.
Enable or disable SMM Security Mitigation
Enables the user to set, change, or delete the administrator (admin) password.
The admin password enables several security features
Enables the user to set, change, or delete the system password.
Enforces password restriction that the password must contain at least one
upper case letter.
Default: OFF
Enforces password restriction that the password must contain at least one
lower case letter.
Default: OFF