GE DHDVH52 Technical Service Manual page 13

5. Remove the 6 large tapping screws (#10) located
around the perimeter of the door outlining the
gasket and the 4 machine screws (#8).
2 #8 Machine
Screws
6. Turn the door over, separate the door cover
from the door frame and set the cover aside.
Door Frame
IMPORTANT: Note the location of the hinge (left or
right) before removing.
Note: The hinge cover is located at the opposite side
of the hinge assembly.
7. Turn the door over. Remove the 2 (#8) tapping
screws and the hinge cover from the frame.
6 #10 Large
Screws
8. Remove the window retainer located on the side
opposite the hinge assembly and underneath
2 #8 Machine
the plastic cover.
Screws
Door Cover
9. Remove the 2 (#8) machine screws that attach
the hinge assembly to the side of the door
frame. Pull the hinge assembly out of the
opening in the door.
– 13 –
(Continued Next Page)