Drives; Tools; Parked Position - Bosch MUMS2VM40G Information For Use

en Familiarising yourself with your appliance
5.4 Drives
Your appliance is equipped with dif-
ferent drives, which are specially de-
signed for its tools and accessories.
Note: Drives 2 and 3 come with pro-
tective covers.
→ "Drive cover", Page 17
Overview of drives
You can find an overview of the
drives and their purposes here.
Drive Use
Drive 1 For the tools.
Drive 1 For accessories, e.g.
meat mincer
Drive 2 For accessories, e.g.
¡ Continuous-feed
shredder
¡ Citrus press
Drive 3 For accessories, e.g.
Blender attachment
5.5 Tools
You can find out everything you need
to know about the different tools
here.
Overview of tools
Use the appropriate tool depending
on use.
14
Tool Use
Kneading hook
¡ Knead dough, e.g. yeast
dough, bread dough,
pizza dough, pasta
dough, pastry dough.
¡ Fold ingredients into the
dough, e.g. seeds.
Stirrer
¡ Mix dough, e.g. cake
mixture, fruit flan.
¡ Fold ingredients into the
dough, e.g. raisins,
chocolate chips.
Whisk
¡ Beat whipped egg
whites and cream (at
least 30% fat).
¡ Mix light dough, e.g.
sponge mixture.
5.6 Parked position
Your appliance is equipped with an
automatic parked position.
After the appliance has switched off,
the drives will continue moving for a
few seconds until the correct parked
position is reached.
Note: The swivel arm will only open
or close with the inserted tool when
the drive is located in the correct

parked position.

The following causes result in an
incorrect parked position:
¡ The power supply was interrupted
during processing.
¡ A safety system terminated pro-
cessing.
¡ During processing the swivel arm
disengaged or the release button
for the swivel arm was pressed.
Tip: You can easily adjust an incor-
rect parking position yourself.
→ "Troubleshooting", Page 19