Boat Data
Streaming Boat Data
You can stream data fields from your compatible chartplotter to your quatix device. The device displays up to
three data fields per page, and up to six pages of data.
1 From the watch face, select START > Boat Data.
2 Bring your quatix device within 3 m (10 ft.) of the chartplotter.
3 Set the chartplotter to enter pairing mode.
See your chartplotter owner's manual for more information.
4 If necessary, on the quatix device, select START to modify a data page.
After the devices are paired, they connect automatically when they are turned on, within range, and the app is
open on the watch. If you need to pair with another chartplotter, in the boat data app, hold MENU and select Pair
New.
Marking a Waypoint on Your Chartplotter
You can mark a waypoint on your compatible chartplotter using your quatix device.
1 From the watch face, select START > Boat Data.
2 Select START > Mark Plotter Wpt.
GNT
10
™
Streaming GNT 10 Data
Before you can stream data fields from your compatible GNT 10 transceiver to your quatix device, you must
download the GNT 10 app
1 From the watch face, select START > GNT 10.
2 Bring your quatix device within 3 m (10 ft.) of the transceiver.
3 Set the transceiver to enter pairing mode.
See your transceiver owner's manual for more information.
4 If necessary, on the quatix device, select START to modify a data page.
The quatix device displays up to three data fields per page, and up to six pages of data. After the devices are
paired, they connect automatically when they are turned on, within range, and the app is open on the watch.
TIP: To pair your quatix device with another transceiver, from the GNT 10 app, hold MENU and select Pair New.
Fusion-Link
App
™
You can use the Fusion-Link app on your quatix device to control the audio playback on your Fusion
Connecting to a Fusion Stereo
1 Set the Fusion stereo to be discoverable.
See your stereo owner's manual for more information.
2 Bring your quatix device within 3 m (10 ft.) of the stereo.
3 From the watch face, select START > FUSION-Link.
The first time you open the app on the watch, the watch automatically pairs with and connects to the stereo.
If you need to pair with another stereo, in the Fusion-Link app, select Settings > Pair New.
After you pair the devices, they connect automatically when turned on, within range, and the app is open on the
watch.
12
(Connect IQ Features,
page 102).
device.
®
Marine Activities