Table of Contents
Advertisement
Language
The display can be set to appear in
one of several different languages.
The flag after the word Language acts
as a guide to prevent a language which
will not be understood from being set.
The selected language will be stored in
memory.
TwinDos
You can set the type and amount of
detergent and also start a cleaning
programme for the TwinDos system.
Detergent/amount
The washer-dryer is pre-set as standard
for UltraPhase 1 and UltraPhase 2 for
hardness range II ().
The settings must be changed in the
electronics:
– for water hardness range I () and
water hardness range III ().
– when changing to a different deter-
gent or fabric conditioner. The
TwinDos containers (optional ac-
cessories) are required for this.
Dosage amounts for UltraPhase 1 and
UltraPhase 2
UltraPhase 1
UltraPhase 2
48 ml
60 ml
72 ml
36 ml
45 ml
54 ml
Adjusting the dosage amount
Detergent / amount
Touch the OK sensor.
Compartment 1
Touch the OK sensor.
Miele UltraPhase 1
Touch the OK sensor.
Dosage - C. 1
Use the and sensors to adjust
the dosage amount as required and
confirm this value with the OK sensor.
Set the dosage for UltraPhase 2
Confirm the message with the
OK sensor.
Dosage - C. 2
Use the and sensors to adjust
the dosage amount as required and
confirm this value with the OK sensor.
The dosage amount has been adjusted.
Settings
60
ml
45
ml
109
Advertisement
Table of Contents
