Language; Degree Of Soiling; Buzzer Volume; Keypad Tone - Miele WTF 130 WPM Operating Instructions Manual

Language 
The display can be set to appear in
one of several different languages.
The flag  after the word Language acts
as a guide to prevent a language which
will not be understood from being set.
The selected language will be stored in
memory.

Degree of soiling

You can select the default setting for
the degree of soiling or switch off the
degree of soiling query.
Options
– Default setting
You can choose between the Light,
Normal or Heavy degree of soiling
settings.
Factory default setting: Normal
– Query
You can switch the degree of soiling
query on or off.
Factory default setting: On

Buzzer volume

You can select one of seven different
settings for the buzzer volume.
The settings are represented by a bar
chart. At the lowest setting, the buzzer
is switched off.

Keypad tone

Each touch of a sensor or press of a
button is confirmed with an audible
tone.
Factory default setting: the keypad tone
is switched on.

Code

The code prevents the washer-dryer
being used without your knowledge.
Options
– Activate
The code is 125 and can be activ-
ated.
When the code has been activated,
you have to enter the code after
switching the washer-dryer on. Oth-
erwise the washer-dryer cannot be
operated.
– Deactivate
For using the washer-dryer without
entering the code. This only appears
if the code has been activated previ-
ously.
– Change
You can enter a code of your own.
If you forget the code the machine
will have to be unlocked by Miele
Service.
Make a note of the new code.
Settings
103