Multiple Monitors Connection - NEC MultiSync M981 User Manual

Multiple Monitors Connection

You can control multiple monitors by using RS-232C, REMOTE or LAN daisy-chain connection.
NOTE:
• Up to 100 monitors can be daisy chained together.



• Please execute [AUTO ID/IP SETTING] to automatically assign unique IDs to each monitor (see
trying to control a monitor by manually specifying the ID number.
Be careful not to make a loop connection on the network. A loop connection occurs when both LAN 1 and LAN 2 on


a single monitor is connected to the same network.
NOTE: In a LAN daisy-chain, only the first monitor should be connected to the network. All other monitors should


be connected to each other. There should be no cable plugged into the LAN 2 port in the last monitor of the
LAN daisy-chain.
Master Monitor
Connector
IN
RS-232C
REMOTE LAN2 (DAISY
CHAIN OUT)
LAN1 (DAISY
CHAIN IN)
Connection
OUT
LAN1 (DAISY
CHAIN IN)
LAN1 LAN2
LAN Cable
Sub Monitors
Connector
IN OUT
LAN2 (DAISY
CHAIN OUT)
LAN1 LAN2
English−65
LAN1 LAN2
LAN Cable
page 104) before
Next monitor