Honeywell 2116 Manual page 5

Digital steel fire & security safe
Table of Contents

Advertisement

SETUP & OPERATION
STEP 3: UNLOCK AND OPEN THE SAFE
This safe is equipped with a dual digital/key lock system that requires entering
an active user code to unlock it and an entry key to open. It allows for two
separate reprogrammable active user codes.
The preset factory user codes are "
1. Begin by inserting the entry key into the
cylindrical key hole on the left side of the
control panel.
2. Turn the key to the left (counter clockwise)
as far as it will go.
3. On the keypad enter the "#" key, then the
user code "1 2 3 4", followed by "#" key again.
4. If correct code is entered, OPEN will appear
on the LCD panel, and you'll hear a chime
tone indicating the safe is unlocked.
5. Within 5 seconds, turn the handle upwards to
the right (clockwise) and pull the door open.
TO LOCK THE SAFE:
Carefully close the door, turn the key
clockwise to the right and remove.
The safe is now locked and an active user
code will need to be re-entered to open.
1 2 3 4
1 2 3 4 5 6
" and "
4
".
1.
2.
3.
4.
5.

Advertisement

Table of Contents
loading

This manual is also suitable for:

21182120

Table of Contents