Stopwatch; Measuring Elapsed Time; Measuring A Split Time; Timer - Casio G-Shock GG-B100 Operation Manual

Stopwatch

The stopwatch measures elapsed time in
1/100-second units for the first hour, and in 1-
second units after that for up to 24 hours.
It can also measure split times.

Measuring Elapsed Time

1.
Enter the Stopwatch Mode.
Navigating Between Modes
l
2.
Use the operations below to measure
elapsed time.
A
Start
A
Stop
A
Resume
A
Stop
First hour After first hour
Minutes, seconds, Hour, minute, second
1/100 seconds
3.
Press (C) to reset the elapsed time to all
zeroes.
Operation Guide 5594

Measuring a Split Time

1.
Enter the Stopwatch Mode.
Navigating Between Modes
l
2.
Use the operations below to measure
elapsed time.
First hour
Minutes, seconds,
1/100 seconds
3.
Press (C) to reset the elapsed time to all
zeroes.

Timer

The timer counts down from a start time
specified by you. A beeper sounds when the
end of the countdown is reached.
The beeper will not sound if battery power
●
is low.
A
Start
C
Split
C
Split release
A
Stop
After first hour
Hour, minute, second

Setting the Timer Start Time

The countdown start time can be set in 1-
minute units up to 24 hours.
1.
Enter the Timer Mode.
Navigating Between Modes
l
2.
Hold down (D) for at least two seconds.
Release the button when the minutes
digits start to flash.
This causes the minutes digits to flash.
Minutes
3.
Use (A) and (C) to change the timer
minutes setting.
4.
Press (E).
This causes the hours digit to flash.
Hours
5.
Use (A) and (C) to change the timer hours
setting.
6.
Press (D) to exit the setting screen.
Note
You can also use G-SHOCK
●
Connected to configure timer settings.
28