Night Owl FTD2 Series User Manual page 14

5. Connect the red female power leads of the
video / power cables to the male power
splitter ends.Make sure you twist and lock
BNC connectors.
6. Connect the power splitter to the camera
power adapter and plug the adapter into a
surge protector or Uninterruptible Power
Supply (UPS).
7. Connect the DVR power adapter to the Power
Input on the rear of the DVR.
8. Plug the DVR power adapter into a surge
protector or Uninterruptible Power Supply
(UPS). Some systems beep upon booting up.
NOTE: Make sure the UPS or surge
8
protector is switched ON.
Power Cable
Connectors
Camera Power
Power
Splitter
Power Splitter
Connectors
Adapter
Surge Protector
(Not Included)
Surge Protector
(Not Included)