Table of Contents
Advertisement
5
1) Drivers 3 screws on the PBA (torque:1.0~1.2)
2) Insert FPCB of KEY to main PBA. Make
sure that FPCB is completely inserted.
1) Be careful not to make scratch and molding damage!
7
Put the PBA on the FRONT part
1) Be careful not to make scratch and molding damage!
2) Be careful not to make damage on Side key FPCB!
(in the red box)
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
6
1) Check the attached status of keypad on
the front cover
1) Be careful not to make scratch and molding damage!
8
Insert FPCB of LCD to main PBA. Make sure
that FPCB is completely inserted.
1) Be careful not to make scratch and molding damage!
2) Beware that you do not damage LCD F-PCB.
11-5
Exploded View and Parts List
Advertisement
Table of Contents
