Table of Contents
Advertisement
Exploded View and Parts List
11-2. Assembly
1
Solder the side key FPCB and Vibration Motor
1) Be careful not to make scratch and molding damage!
2) Be careful not to make damage to side key FPCB !
3) Be careful not to make damage to motor wire !
3
1) Put Bond on the Motor Solder pad
2) Turn the Motor and Put the Motor in Motor
Bracket
(Remove a release paper.)
Remove a
release paper.
1) Be careful not to make scratch and molding damage!
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
Solder the Speaker FPCB
1) Be careful not to make scratch and molding damage!
2) Be careful not to make damage to speaker FPCB !
4
1) Insert camera FPCB depending on silk line.
2) Insert camera in speaker bracket.
(Remove a release paper.)
Remove a
release paper.
1) Be careful not to make scratch and molding damage!
2) Beware that you do not damage camera F-PCB.
11-4
Advertisement
Table of Contents
