Jumpers and connectors
System board jumper settings
For information about resetting the password jumper to disable a password, see Disabling forgotten
password in this document.
Table 30. System board jumper settings
Jumper
Setting
PWRD_EN
(default)
NVRAM_CLR
(default)
Description
The password feature is enabled (pins 4–6).
The password feature is disabled (pins 2–4). iDRAC
local access is unlocked at the next AC power
cycle.
The configuration settings are retained at system
boot (pins 1–3).
The configuration settings are cleared at the next
system boot (pins 3–5).
Get other manuals https://www.bkmanuals.com
6
101