The Message "Connecting To Anynet+ Device; The Anynet+ Device Won't Play - Samsung QN55S90CDFXZA E-Manual

I want to start Anynet+. I also want the connected devices to turn on when
the TV is turned on.
Check if the Anynet+ device is properly connected to the TV, and then select
Anynet+ (HDMI-CEC) is set to On.
• (left directional button)
Anynet+ (HDMI-CEC)
I want to exit Anynet+. It is inconvenient to turn on other devices because
the TV also turns on. It is inconvenient because the connected devices (e.g.
set-top box) turn off together.
To turn off the Anynet+ function of a device connected to the TV, turn off the
device.
• (left directional button)
Anynet+ (HDMI-CEC)
When Anynet+ (HDMI-CEC)
together with the TV. To prevent a specific device connected to the TV from turning off automatically, turn off the
HDMI-CEC function on a specific device connected to the TV.
The message "Connecting to Anynet+ device..." or "Disconnecting from
Anynet+ device" appears on the screen.
You cannot use the remote control when the TV is configuring Anynet+ or switching to the TV viewing screen.
Use the remote control after the TV has completed the Anynet+ configuration or has switched to the TV viewing
screen.

The Anynet+ device won't play.

You cannot use the play function when
Settings
Try Now
Settings
Try Now
is turned off, the soundbar connected via the HDMI (eARC) port does not turn off and on
Reset is in progress.
All Settings Connection
All Settings Connection
- 206 -
Anynet+ (HDMI-CEC) menu to see if
External Device Manager
Anynet+ (HDMI-CEC) function of the
External Device Manager