Samsung QN55S90CDFXZA E-Manual page 130

Using Cable Box IP Remote
(left directional button)
Manager Cable Box IP Remote
Set the cable box that supports IP control to be controlled with Samsung remote control.
This function may not be supported depending on the model.
Using Input Signal Plus
(left directional button)
Manager Input Signal Plus
Expands the input signal range for HDMI connections.
If the Input Signal Plus
When you select the HDMI connector you want to use for
Input Signal Plus function to On, the TV screen may flicker.
When you connect the TV to an external device that supports only the UHD 24 Hz or UHD 30 Hz frequency, or any FHD
frequency, the Input Signal Plus
For more information about the supported UHD resolutions, refer to "Supported Resolutions for UHD Input Signals."
For more information about the supported 8K resolutions, refer to "Resolutions for Input Signals supported by 8K models
(QN7**C series or higher)."
Using HDMI Black Level
(left directional button)
Manager HDMI Black Level
Use HDMI Black Level to adjust the black level to compensate for low black levels, low contrast, or dull colors
generated by external devices connected to the TV via an HDMI cable.
This function is only available when the input signal connected to the TV via an HDMI connector is set to RGB444.
Settings
Try Now
Settings
Try Now
feature is turned off, HDR signals sent from an external device cannot be received.
function may not be available. In this case, turn off the
Settings
Try Now
All Settings Connection
All Settings Connection
Input Signal Plus, and then press the Select button to set the
All Settings Connection
- 130 -
External Device
External Device
Input Signal Plus function.
External Device