Subaru Outback 2017 Owner's Manual page 291

When registering/connecting a cellular phone
Symptom
A cellular phone cannot be
registered.
A Bluetooth connection cannot be
made.
*: For details, refer to the owner's manual that came with the cellular phone.
Likely cause
An incorrect passcode was entered
on the cellular phone.
The registration operation has not
been completed on the cellular phone
side.
Old registration information remains
on either this system or the cellular
phone.
Another Bluetooth device is already
connected.
Bluetooth function is not enabled on
the cellular phone.
Automatic Bluetooth connection on
this system is set to off.
Solution
Enter the correct passcode on the
cellular phone.
Complete the registration operation
on the cellular phone (approve
registration on the phone).
Delete the existing registration
information from both this system and
the cellular phone, then register the
cellular phone you wish to connect to
this system.
Manually connect the cellular phone
you wish to use to this system.
Enable the Bluetooth function on the
cellular phone.
Set automatic Bluetooth connection
on this system to on when the ignition
switch is turned to the "ACC" or "ON"
position.
WHAT TO DO IF
Page
Cellular This
phone system
* -
* -
* 181
- 182
* -
- 187
10
289