Network Settings; Network Settings; Registering The Ip Address - Kyocera KM-1820 Setup Manual

Network Settings

Registering the IP Address

System Menu/
Counter
or
System Setting
Enter
or
Network Setting
Enter
or
TCP/IP Setting
Enter
or
DHCP
Enter
or
Off
Enter
or
IP Address
Enter
NETWORK SCANNER SETUP GUIDE
Check the IP address with your network administrator before changing this setting.
You can enter an IP address only when the DHCP setting is Off and the TCP/IP
setting is On. Any changes made to the network settings will only become effective
after you turn the machine off and then back on again.
1
Access IP Address.
2
Use the numeric keys to enter each segment of the IP address in turn,
pressing or [*.] to move between segments.
If you make an error in entering a portion of the IP address, press
return to the previous block of digits and re-enter the correct number.
3
Press Enter on completion.
4
Register the Subnet Mask - refer to Registering the Subnet Mask on page 6.
Get other manuals https://www.bkmanuals.com
Setup
to
5