Omron OMNUC G Series User Manual page 242

4-3 Wiring Conforming to EMC Directives
 Selecting Other Parts for Noise Resistance
This section explains the criteria for selecting other connection components required to improve
noise resistance.
Understand each component's characteristics, such as its capacity, performance, and applicable
conditions when selecting the components.
For more details, contact the manufacturers directly.
Noise Filters for the Power Supply Input
 Use a noise filter to attenuate external noise and reduce noise emitted from the Servo Drive.
 Select a noise filter with a rated current that is at least two times greater than the effective load
current (the rated current of the main circuit power supply input given in Main Circuit and
4
Servomotor Connector Specifications on page 4-22).
Manufacturer
NEC TOKIN
Okaya Electric
Industries Co.,
Ltd.
TDK
Note1. To attenuate noise at low frequencies below 200 kHz, use an isolation transformer and a
Note2. To attenuate noise at high frequencies over 30 MHz, use a ferrite core and a high-frequency
Note3. If multiple Servo Drives are connected to a single noise filter, select a noise filter with a rated
4-43
Model
GT-2050
GT-2100
GT-2150
GT-2150
HFP-2153
HFP-2303
SUP-EK10-ER-6
SUP-EK15-ER-6
SUP-EK20-ER-6
SUP-EK30-ER-6
3SUP-HL10-ER-6
3SUP-HL15-ER-6
3SUP-HL30-ER-6
3SUP-HL75-ER-6
3SUP-HL100-ER-6
ZRCS2006-00S
ZRCS2010-00S
ZRCS2020-00S
ZRCS2030-00S
ZRCT5050-MF
ZRCT5080-MF
ZRCT5100-MF
noise filter.
noise filter with a feed-through capacitor.
current at least two times the total rated current of all the Servo Drives.
Rated
Applicable standards
current
5 A
10 A
UL, CSA, VDE, T
15 A
20 A
15 A
UL, CSA, T
30 A
10 A
15 A
UL, CSA, T
20 A
30 A
10 A
15 A
Ü
30 A UL, T V
75 A
100 A
6 A
10 A
UL, CSA, NEMKO
20 A
30 A
50 A
80 A UL, CSA, NEMKO
100 A
Remarks
Single-
Ü
V
phase
Three-
Ü V
phase
Single-
Ü V
phase
Three-
phase
Single-
phase
Three-
phase