Asus RS720A-E12 Series User Manual page 143

SEV-SNP Support [Disabled]
Configuration options: [Disabled] [Enabled] [Auto]
Allow Compliance [Auto]
Allows you to enable or disable PCIe RP entering the polling compliance state.
Configuration options: [Disabled] [Enabled] [Auto]
SRIS [Auto]
Configuration options: [Disabled] [Enabled] [Auto]
Multi Upstream Auto Speed Change [Auto]
Defines the setting of this feature for all PCIe devices. When this option is set to [Auto],
the DXIO default setting of 0 for Gen1 and 1 for Gen2/3 is applied.
Configuration options: [Disabled] [Enabled] [Auto]
Multi Auto Speed Change on Last Rate [Auto]
Force PCIe link training speed to last advertised for all ports.
[Disabled]
[Enabled]
[Auto]
PCIe Link Speed Capability [GEN5]
Configuration options: [Maximum speed] [Gen1] [Gen2] [GEN3] [GEN4] [GEN5] [Auto]
RTM Margining Support [Auto]
Configuration options: [Disabled] [Enabled] [Auto]
Advertise EQ to High Rate Support [Auto]
Controls the ability to advertise Equalization Bypass to Highest Rate Support in TSxs
sent prior to LinkUp=1.
Configuration options: [Disabled] [Enabled] [Auto]
nBif Common Options
Allows you to configure nBif Common options.
FCH Common Options
I3C/I2C Configuration Options
Allows you to configure I3C/I2C options.
SATA Configuration Options
Allows you to configure SATA options.
USB Configuration Options
Allows you to configure USB options.
Ac Power Loss Options
Allows you to configure AC power loss options.
UART Configuration Options
Allows you to configure UART options.
ASUS RS720A-E12 Series
Use highest data rate ever advertised.
Use last data rate advertised.
Use default settings.
5-17