Table of Contents
Advertisement
UP336BH (WDECT2355) ENG OM
12/28/04
* To repeat a message, press # then 1 within about four seconds to repeat the previous
message, or press # then 1 after about four seconds to repeat the current message.
** For the Memo Record and Greeting Message Record functions, the first time you enter
the corresponding command, it starts the Recording function. If you want to stop the
recording, enter the command again.
5) After the command has finished, you hear intermittent beeps indicating that the
system is in the command waiting mode. You may enter another command at this time
from the chart above.
6) When you are finished, hang up to exit the system. The answering system
automatically returns to standby.
Remote access with the handset
You can operate your answering system from another room using a handset.
When you receive a
•
1) When the phone is in standby mode, press
call, the remote
Answering Machine operation appears on the handset display. The answering
operation is canceled.
system announces the current time and the number of messages stored in the memory.
When another
•
Messages will be played in the order in which they were received. The time and day
handset or base make
a call, the remote
that each message was received is announced after the message is played.
operation is
2) You hear "To play incoming messages, press two. For help, press zero."
cancelled.
You will hear a beep.
During the remote
•
3) Enter a command within 30 seconds. You may select a command from the
operation "—"
appears on the base.
following chart:
If you have new
•
messages and old
messages, only the
new messages will be
played. After you
have reviewed your
new messages, you
can play your old
messages by again
pressing 2.
[ 54 ]
All manuals and user guides at all-guides.com
9:22 AM
Page 54
. on the handset. Remote
Advertisement
Table of Contents
