Technical Information 04.2013
4.4
Switch Unit
4.4.1
Removing the Switch Unit
.
Remove the shroud, air filter and baffle.
.
Swing the filter base forward in direction of
handle.
2
.
Loosen the screw (1) and pull away the switch
unit (2).
.
Remove the connector (3) upwards.
.
Press down the locking tab (arrow) and
separate the connector.
TI_04_2013_30_01_01.fm
1
3
4.4.2
Installing the Switch Unit
.
Push the switch unit (2) onto the carburetor.
.
Tighten screw (1) carefully to 9.0 lbf. in
(1.0 Nm).
.
Fit the connector (3) and the close the
connector (arrow).
.
Assemble all other parts.
4.5
Serial Number
The serial number is located on the side of the
crankcase.
Page 8
3
2
1