Table of Contents
Advertisement
1. Remove the bottom plate of the oven cavity
to get access to the oven burner .
2. Carefully remove from the burner the
thermocouple A. Next remove the spark
plug B.
3. Unscrew the screw and slowly pull out the
burner.
24
A
B
4. Release the burner injector with a 7 mm
socket spanner and replace it with a right
one.
Assemble the burner in a revers sequence.
Replace the gas type sticker near the gas
supply ramp with the one related to the new gas
type.
Adjusting the minimum gas level on the
oven burner
1. Disconnect the appliance from the
electricity.
2. Remove the knob for the oven functions. If
there is no access to the bypass screw
dismount the control panel before
adjustment start.
1
2
www.zanussi.com
Advertisement
Table of Contents
