Daikin GTKY50UV16V2 Operation Manual page 10

Operation
TIMER/GOOD SLEEP Operations
TIMER Operation
Timer functions are useful for automatically
switching the air conditioner on or off in the
morning or at night. You can also use the ON
TIMER and GOOD SLEEP OFF TIMER together.
■
To use ON TIMER operation
1. Press�.
I � "
IHR .© " is displayed on the LCD
1
ON
�
Each pressing of � changes the
time setting by 1 hour.
The time can be set between 1
and 12 hours.
• The TIMER lamp lights orange.
■
To use OFF TIMER operation
C I •
OFF
1. Press
IHR. © I IHR. © " is disp l ayed on the LCD
"
1
, OFF OFF
Each pressing of C
time setting by 1 hour.
The time can be set between 1
and 9 hours.
• The TIMER lamp lights orange.
■
To cancel TIMER operation
2. Pr ess
(cAN cEL J •
• " IHR. © " disappears from the LCD
IOFF
• The TIMER lamp goes off.
■
To combine ON TIMER and
GOOD SLEEP OFF TIMER
• A sample setting for combining
the 2 timers is shown below.
• "ON" and "OFF" are displayed
on the LCD.
NOTE
■ Note on TIMER operation
• Once you set ON / GOOD SLEEP OFF
TIMER, the time setting is kept in the
memory. The memory is cleared when the
remote controller batteries are replaced.
9
I changes the
O FF
IHR .© I
fOFFON
GOOD SLEEP Operations
■
To use GOOD SLEEP OFF TIMER operation.
GOODSI.EEP
1 P
. ress C!L)
• " ·c "
blinks for a few seconds.
• The temperature shift value
(default: 2) is displayed on
the LCD for a few seconds.
• "0", "OFF" and the stop
time (default: 2HR.) are
.
displayed on the LCD.
• The TIMER lamp lights
orange.
�
TEMP
2. Press v
• Each pressing of the button changes tempera­
ture shift value by 1
You can specify a temperature shift value
between +1 C and +5
°
ciJ
3. Press
• Each pressing of the button changes the time
setting.
The time can be set between 1 and 9 hours.
.
1 hour ... -+ 9 hours-+ OFF
■
To cancel GOOD SLEEP OFF TIMER
operation
1. Pre ss
(CANCEL)
• " 0 ","OFF " and the stop time indication
disappear from the LCD.
• The TIMER lamp goes off.
NOTE
■ Notes on GOODSLEEP TIMER operation
• The set temperature increases by 0.5
minutes until the total increase reaches the
specified shift value. There is no function for
heating the room.
EXAMPLE
Temperature shift value at +2
Temperature shift value at +5
Set temperature
\
+5 ° C
+4 ° C
+3 ° C
(Default) +2 ° C
+1 C
°
■ In the following cases, set the timer again.
• After the circuit breaker has turned off.
• After a power failure.
• After replacing the batteries in the remote
controller.
coo
d .
urmg L operation.
0. 1
while "DC" is blinking.
C.
°
C.
°
while "DC" is blinking.
>
°
C, OFF TIMER at 8 hours _
°
C, OFF TIMER at 8 hours -----
OFF TIMER, variable (1-9hours)
.
□
IC
E!)C
c:::J
ON/OFF
ISP ay
C in 30
D