Yamaha MusicCast TSR-7810 Owner's Manual page 110

Adjustment
Adjusts the delay between video and audio output manually when "Auto/Manual Select" is set
to "Manual". You can fine-adjust the audio output timing when "Auto/Manual Select" is set to
"Auto".
Setting range
0 ms to 500 ms (1 ms increments)
X
• "Offset" shows the difference between automatic adjustment and fine adjustment.
• This setting is also available in "Lipsync Adjustment" (p.94) in the "Option" menu.
⬛
Dynamic Range
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS
signals) playback.
Settings
Maximum Produces audio without adjusting the dynamic range.
Standard Optimizes the dynamic range for regular home use.
Sets the dynamic range for clear sound even at night or at low volumes.
Minimum/Auto
When playing back Dolby TrueHD signals, the dynamic range is automatically
adjusted based on the input signal information.
⬛
Max Volume
Sets the limit value of the volumes.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
⬛
Initial Volume
Sets the initial volume when the receiver is turned on.
Settings
Off Sets the level to the volume level of the unit when it last entered standby mode.
Sets at Mute or the specified volume level (-80 dB to +16.5 dB, 0.5 dB increments).
On
(This setting works only when the initial volume is set lower than "Max Volume".)
⬛
Adaptive DSP Level
Selects whether to automatically adjust the CINEMA DSP effect level when the volume is
adjusted.
Settings
Off Does not adjust the effect level automatically.
On Adjusts the effect level automatically.
⬛
CINEMA DSP 3D Mode
Enables/disables CINEMA DSP 3D (p.60). If this function is set to "On", CINEMA DSP 3D
functions with the selected sound programs (except 2ch Stereo and 7ch Stereo).
Settings
Off Disables CINEMA DSP 3D.
On Enables CINEMA DSP 3D.
⬛
Virtual Surround Back Speaker
Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers.
When VSBS is enabled, the unit creates VSBS when no surround back speakers are connected.
Settings
Off Disables Virtual Surround Back Speaker (VSBS).
On Enables Virtual Surround Back Speaker (VSBS).
X
VSBS is effective only when 6.1- or 7.1-channel content is played back.
110
En