Yamaha TR-5630RDS Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Stereo Receiver
  5. TR-5630RDS
  6. Owner's manual

Yamaha TR-5630RDS Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
All manuals and user guides at all-guides.com
GB
TR-5630RDS
ceiver
-tuner audio-vidéo
OWNER'S MANUAL
MODE D'EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING

Advertisement

Table of Contents
loading

Related Manuals for Yamaha TR-5630RDS

Summary of Contents for Yamaha TR-5630RDS

  • Page 1 All manuals and user guides at all-guides.com TR-5630RDS ceiver -tuner audio-vidéo OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING...
  • Page 2 All manuals and user guides at all-guides.com...

  • Page 3: Table Of Contents

    All manuals and user guides at all-guides.com CONTENTS ADVANCED OPERATION INTRODUCTION CONTENTS ............1 SET MENU ............39 FEATURES ............. 2 Set menu list ............39 Adjusting the items on the set menu ....... 39 GETTING STARTED ..........3 SOUND 1 SPEAKER SET (speaker mode settings) Supplied accessories ..........

  • Page 4: Features

    N Dolby Pro Logic/Dolby Pro Logic II decoder N Dolby Digital/Dolby Digital + Matrix 6.1 Decoder (0.1% THD, 1 kHz, 6Ω) N DTS/DTS + Matrix 6.1 Decoder [U.S.A. and Canada models] N CINEMA DSP: Combination of YAMAHA DSP Main: 70 W + 70 W Center: 70 W...

  • Page 5: Getting Started

    All manuals and user guides at all-guides.com GETTING STARTED Supplied accessories After unpacking, check that the following parts are contained. Remote control Batteries (2) Indoor FM antenna (AA, R06, UM-3) (U.S.A., Canada, China, Korea and General models) DVD D-TV/CBL VCR POWER MD/CD-R V-AUX 6CH IN TUNER...

  • Page 6: Controls And Functions

    All manuals and user guides at all-guides.com CONTROLS AND FUNCTIONS Front panel VOLUME RDS MODE/FREQ PRESET/TUNING FM/AM STANDBY EDIT PTY SEEK MODE START TUNING MODE MEMORY AUTO/MAN`L MONO MAN`L/AUTO FM INPUT MODE 6CH INPUT SILENT SPEAKERS STEREO PROGRAM A/B/C/D/E PRESET/TUNING CONTROL BASS/TREBLE INPUT...
  • Page 7 All manuals and user guides at all-guides.com CONTROLS AND FUNCTIONS w STEREO (EFFECT) Switches between normal stereo and DSP effect (U.K. and Europe models only) reproduction. When you select STEREO, the unit mixes a RDS MODE/FREQ down all Dolby Digital and DTS signals (except the LFE channel) as well as those 2-channel signals without Press this button when the unit is receiving an RDS effects, to the main left and right speakers.

  • Page 8: Remote Control

    All manuals and user guides at all-guides.com CONTROLS AND FUNCTIONS Remote control 1 Infrared emitter This section describes the remote control controls and their functions. Outputs infrared control signals. Aim this emitter at the unit when using the remote control. 2 Input selector buttons Select the input source.
  • Page 9 All manuals and user guides at all-guides.com CONTROLS AND FUNCTIONS I Using the remote control t NIGHT Sets the unit in night listening mode. y STEREO VOLUME Switches between normal stereo and DSP effect PRESET/TUNING FM/AM STANDBY EDIT TUNING MODE MEMORY reproduction.

  • Page 10: Front Panel Display

    All manuals and user guides at all-guides.com CONTROLS AND FUNCTIONS Front panel display V-AUX D-TV/CBL MD/CD-R TUNER MUTE VOLUME VIRTUAL NIGHT MATRIX STEREO AUTO HiFi SLEEP HOLD TUNED MEMORY SILENT DIGITAL ~~~~~~~~~~~~~~ L C R RC RR (U.K. and Europe models only) 1 Processor indicators w NIGHT indicator The indicators for the various decoders light up when the...

  • Page 11: Connections

    All manuals and user guides at all-guides.com CONNECTIONS I Connecting to digital jacks Before connecting components This unit has digital jacks for direct transmission of digital signals through either a coaxial or fiber optic cable. You can use the digital jacks to input PCM, Dolby CAUTION Digital and DTS bitstreams.

  • Page 12: Connecting Video Components

    All manuals and user guides at all-guides.com CONNECTIONS I Connecting another video component Connecting video components Connect the video signal output jack on your component to the VIDEO jack on this unit. Connect the audio signal output jacks on the component I Connecting a video monitor to the AUDIO jacks on this unit.

  • Page 13: Connecting Audio Components

    All manuals and user guides at all-guides.com CONNECTIONS Note Connecting audio components • Once you have connected a recording component to this unit, keep its power turned on while using this unit. If the power is I Connecting a CD player off, this unit may distort the sound from other components.

  • Page 14: Connecting The Antennas

    A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may improve the quality. Consult the nearest authorized YAMAHA dealer or service center about the outdoor antennas. FREQUENCY STEP switch...

  • Page 15: Connecting An External Decoder

    All manuals and user guides at all-guides.com CONNECTIONS Connecting an external decoder This unit is equipped with 6 additional input jacks (MAIN left and right, CENTER, SURROUND left and right and SUBWOOFER) for discrete multi-channel input from a component equipped with a multi-channel decoder and 6 channel output jacks such as a DVD/SACD player.

  • Page 16: Connecting The Speakers

    (low-frequency effect) channel with high fidelity when floor. playing back Dolby Digital or DTS signals. The YAMAHA Active Servo Processing Subwoofer System is Subwoofer ideal for natural and lively bass reproduction. The position of the subwoofer is not so critical, because low bass sounds are not highly directional.
  • Page 17 All manuals and user guides at all-guides.com CONNECTIONS I Connections Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) in accordance with the markers on this unit, the speakers, and the speaker cables. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.
  • Page 18 SUBWOOFER jack When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System, connect the input jack of the subwoofer system to this jack. This unit will direct low bass signals distributed from the main, center and/or rear channels to this jack in accordance with your SPEAKER SET selections. The LFE (low- frequency effect) signals generated when Dolby Digital or DTS is decoded are also directed to this jack in accordance with your SPEAKER SET selections.

  • Page 19: Connecting The Power Supply Cords

    All manuals and user guides at all-guides.com CONNECTIONS Connecting the power supply Turning on the power cords When all connections are complete, turn on the power of this unit. VOLTAGE SELECTOR VOLUME PRESET/TUNING FM/AM STANDBY EDIT TUNING MODE MEMORY AUTO/MAN`L MONO MAN`L/AUTO FM VOLTAGE INPUT MODE 6CH INPUT...

  • Page 20: Basic System Settings

    All manuals and user guides at all-guides.com BASIC SYSTEM SETTINGS The “BASIC” menu allows you to set some of the basic “SOUND” menu parameters with a minimum of effort. If you wish to configure the unit more precisely to suit your listening environment, use the more detailed parameters from the “SOUND”...
  • Page 21 All manuals and user guides at all-guides.com BASIC SYSTEM SETTINGS SET MENU BASIC SOUND INPUT OPTION 1 SETUP 2 SP LEVEL Press –/+ to alter the settings for each Press –/+ to adjust the balance between parameter. Use d to move to the next each speaker and the left main speaker.

  • Page 22: Setting The Unit To Match Your Speaker System

    All manuals and user guides at all-guides.com BASIC SYSTEM SETTINGS 4 SET or CANCEL Setting the unit to match your Select SET to confirm the changes you made to the above three settings. The unit will output a test tone to speaker system the speakers (see 5 ).

  • Page 23: Playback

    All manuals and user guides at all-guides.com PLAYBACK Press INPUT l / h repeatedly (one of the input selector buttons on the remote control) to select the input source. The selected input source name and input mode VOLUME appear on the front panel display for a few seconds. PRESET/TUNING FM/AM EDIT STANDBY...
  • Page 24 All manuals and user guides at all-guides.com PLAYBACK I BGV (background video) function Start playback or select a broadcast station The BGV function allows you to view images from a on the source component. video source together with sounds from an audio source. Refer to the operation instructions for the For example, you can enjoy listening to classical music component.

  • Page 25: Input Modes And Indications

    All manuals and user guides at all-guides.com PLAYBACK I Notes on digital signals Input modes and indications The digital input jacks of this unit can handle 96 kHz sampling digital signals. Note the following when a This unit is equipped with 2 types of input jacks for the digital signal with a sampling frequency greater than 48 CD and DVD sources only.

  • Page 26: Selecting A Sound Field Program

    All manuals and user guides at all-guides.com PLAYBACK Notes Selecting a sound field program • There are 9 programs with sub-programs available with this unit. However, the selection depends on the input signal You can enhance your listening experience by selecting a format and not all sub-programs can be used with all input DSP program.
  • Page 27 All manuals and user guides at all-guides.com PLAYBACK I Selecting PRO LOGIC or PRO LOGIC II I Playing Dolby Digital EX or DTS ES You can listen to 2-channel sources decoded into five material discrete channels by selecting PRO LOGIC or PRO Press 6.1/5.1 to turn on the Dolby Digital + Matrix 6.1 or LOGIC II in program No.
  • Page 28 All manuals and user guides at all-guides.com PLAYBACK I Virtual CINEMA DSP Notes With Virtual CINEMA DSP, you can enjoy all DSP programs without rear speakers. It creates virtual speakers • If you turn off the sound effects, no sound is output from the to reproduce a natural sound field.

  • Page 29: Digital Sound Field Processing (Dsp)

    The traditional stereo system that uses only two speakers is not capable of recreating a realistic sound field. YAMAHA’s DSP requires four effect speakers to recreate sound fields based on the measured sound field data. The processor controls the strength and delay time of the signals output from the four effect speakers to localize the virtual sound sources and fully encompass the listener.

  • Page 30: Cinema-Dsp

    CINEMA-DSP is an upgraded version of YAMAHA DSP specially designed for movie soundtracks. CINEMA-DSP integrates the DTS, Dolby Digital, and Dolby Pro Logic surround sound technologies with YAMAHA DSP sound field programs to provide a surround sound field. It recreates comprehensive movie sound design in your audio room. In CINEMA-DSP sound field programs, YAMAHA’s exclusive DSP processing is added to the Main left and right, and...
  • Page 31 All manuals and user guides at all-guides.com CINEMA-DSP I For movie programs Program Features MOVIE Spectacle This program creates the extremely wide sound field of a 70-mm movie theater. It THEATER 1 precisely reproduces the source sound in detail, making both the video and the sound field incredibly real.

  • Page 32: Sound Field Effects

    Digital or DTS technology to recreate a dynamic sound that gives you the feeling of being in a public theater. I Dolby Digital/DTS + DSP sound field effect These programs use YAMAHA’s tri-field DSP processing on each of the Dolby Digital or DTS signals for the front, Presence DSP left surround, and right surround channels.

  • Page 33: Tuning

    All manuals and user guides at all-guides.com TUNING There are 2 methods of tuning; automatic and manual. Press PRESET/TUNING l / h once to begin Automatic tuning is effective when station signals are automatic tuning. strong and there is no interference. Press h to tune in to a higher frequency, or press l to tune in to a lower frequency.

  • Page 34: Presetting Stations

    All manuals and user guides at all-guides.com TUNING Notes Presetting stations • Any stored station data existing under a preset number is I Automatically presetting stations (for FM cleared when you store a new station under that preset number. stations) •...
  • Page 35 All manuals and user guides at all-guides.com TUNING I Manually presetting stations Press PRESET/TUNING l / h to select a You can store up to 40 stations (8 stations x 5 groups) preset station number (1 to 8) while the manually.

  • Page 36: Selecting A Preset Station

    All manuals and user guides at all-guides.com TUNING I Exchanging preset stations Selecting a preset station You can exchange the assignment of two preset stations. The example below describes the procedure for You can recall any desired station simply by selecting the exchanging preset station “E1”...

  • Page 37: Receiving Rds Stations

    All manuals and user guides at all-guides.com RECEIVING RDS STATIONS RDS (Radio Data System) is a data transmission system used by FM stations in many countries. RDS data contains a variety of information such as PS (Program Service name), PTY (Program Type), RT (Radio Text), CT (Clock Time), EON (Enhanced Other Networks), and others.

  • Page 38: Pty Seek Function

    All manuals and user guides at all-guides.com RECEIVING RDS STATIONS PTY SEEK function EON function If you select the desired program type, the unit This function uses the EON data service on the RDS automatically searches all preset RDS stations that are station network.

  • Page 39: Sleep Timer

    All manuals and user guides at all-guides.com SLEEP TIMER I Canceling the sleep timer Use this feature to automatically set this unit in standby mode after the amount of time you have set. The sleep Press SLEEP repeatedly until “SLEEP OFF” timer is useful when you are going to sleep while this unit is playing or recording a source.

  • Page 40: Recording

    All manuals and user guides at all-guides.com RECORDING Recording adjustments and other operations are Notes performed on other recording components. Refer to the operation instructions for these components for details on • Do a test recording before you start an actual recording. their operation .

  • Page 41: Set Menu

    All manuals and user guides at all-guides.com SET MENU You can set the following parameters on the set menu to Adjusting the items on the set obtain a better sound from the unit. Change the settings to reflect the needs of your listening environment. menu Set menu list Use the remote control to make adjustments.

  • Page 42: Sound 1 Speaker Set (Speaker Mode Settings)

    All manuals and user guides at all-guides.com SET MENU SOUND 1 SPEAKER SET Press –/+ once to enter the setup mode of the (speaker mode settings) selected item. The last setting you adjusted appears on the front panel Use this feature to select suitable output modes for your display.
  • Page 43 All manuals and user guides at all-guides.com SET MENU I 1B MAIN (main speaker mode) I 1D BASS (bass out mode) Choices: LARGE, SMALL LFE signals carry low-frequency effects when this unit decodes a Dolby Digital or DTS signal. Low-frequency LARGE signals are defined as 90 Hz and below.

  • Page 44: Sound 2 Sp Distance (Speaker Distance)

    All manuals and user guides at all-guides.com SET MENU SOUND 2 SP DISTANCE SOUND 3 LFE LEVEL (speaker distance) Use this feature to adjust the output level of the LFE (low-frequency effect) channel when playing back a Use this feature to adjust the delay applied to center Dolby Digital or DTS signal.

  • Page 45: Sound 5 Center Geq (Center Graphic Equalizer)

    All manuals and user guides at all-guides.com SET MENU SOUND 5 CENTER GEQ (center INPUT 1 I/O ASSIGN (input/ graphic equalizer) output assignment) Use this feature to adjust the built-in 5-band graphic You can assign jacks according to the component to be equalizer so that the center speaker tonal quality matches used if this unit’s DIGITAL INPUT jack settings that of the left and right main speakers.

  • Page 46: Option 1 Display Set

    All manuals and user guides at all-guides.com SET MENU OPTION 1 DISPLAY SET I DIMMER Use this to adjust the brightness of the front panel display. Control range: –4 to 0 OPTION 2 MEM. GUARD (memory guard) Use this feature to prevent accidental changes to settings on the unit.

  • Page 47: Setting The Speaker Levels

    All manuals and user guides at all-guides.com SETTING THE SPEAKER LEVELS Adjusting the volume during Using the test tone playback Use the test tone to set speaker levels so that the volume from each speaker is identical when heard from your You can adjust the volume of the speakers while listening listening position.

  • Page 48: Sound Field Program Parameter Editing

    All manuals and user guides at all-guides.com SOUND FIELD PROGRAM PARAMETER EDITING Repeat steps 1 – 3 if you wish to alter other Changing parameter settings parameters. The initial sound field program settings will provide you Note with an excellent listening experience as they are. It is not •...

  • Page 49: Digital Sound Field Parameter Descriptions

    All manuals and user guides at all-guides.com SOUND FIELD PROGRAM PARAMETER EDITING Digital sound field parameter descriptions You can adjust the values of certain digital sound field parameters so the sound fields are recreated accurately in your listening room. Not all of the following parameters are found in every program. I DSP LEVEL Function: This parameter adjusts the level of all the DSP effect sounds within a narrow range.

  • Page 50: Troubleshooting

    Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer or service center. I General...
  • Page 51 All manuals and user guides at all-guides.com TROUBLESHOOTING Problem Cause Remedy Refer to page No sound / weak Incorrect cable connections. Connect the cables properly. If the problem persists, sound from particular the cables may be defective. speakers. No sound from the The sound effect is switched off.
  • Page 52 All manuals and user guides at all-guides.com TROUBLESHOOTING Problem Cause Remedy Refer to page A “humming” sound can Incorrect cable connections. Firmly connect the audio plugs. If the problem – be heard. persists, the cables may be defective. The volume level cannot The component connected to the OUT Turn on the power to the component.
  • Page 53 All manuals and user guides at all-guides.com TROUBLESHOOTING I Tuner Problem Cause Remedy Refer to page FM stereo reception is The characteristics of FM stereo Check the antenna connections. noisy. broadcasts may cause this problem Try using a high-quality directional FM when the transmitter is too far away or antenna.

  • Page 54: Glossary

    Based on a wealth With this unit, any sound environment from monaural up of actually measured data, YAMAHA CINEMA DSP uses to a 5.1-channel configuration can be freely selected for YAMAHA original sound field technology to combine your enjoyment.
  • Page 55 All manuals and user guides at all-guides.com GLOSSARY I PCM (Linear PCM) Linear PCM is a signal format under which an analog audio signal is digitized, recorded and transmitted without using any compression. This is used as a method of recording CDs and DVD audio.
  • Page 56 All manuals and user guides at all-guides.com SPECIFICATIONS AUDIO SECTION FM SECTION • Minimum RMS Output Power for Main, Center, Rear • Tuning Range 1 kHz, 0.1% THD, 6 Ω [U.S.A. and Canada models] ......87.5 to 107.9 MHz [U.S.A. and Canada models] ..........70 W [Other models] ..........
  • Page 57 All manuals and user guides at all-guides.com...
  • Page 58 All manuals and user guides at all-guides.com NS-P1 00/ NS-P1 06 (NS-P100/NS-P106: NX-E130 + NX-C130 + SW-P130) HOME CINEMA 5.1CH SPEAKER PACKAGE/ HOME CINEMA 6.1CH SPEAKER PACKAGE OWNER’S MANUAL...
  • Page 59 All manuals and user guides at all-guides.com IMPORTANT SAFETY INSTRUCTIONS Read these instructions. CAUTION Keep these instructions. RISK OF ELECTRIC SHOCK Heed all warnings. DO NOT OPEN Follow all instructions. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE Do not use this apparatus near water.
  • Page 60 “OFF” and “ON”, requirements. Modifications not expressly approved please try to eliminate the problem by using one of the by Yamaha may void your authority, granted by the following measures: FCC, to use the product.
  • Page 61 All manuals and user guides at all-guides.com UNPACKING Please check to make sure all listed items are included. G Main and rear speakers G Speaker cables (and rear center speaker for NS-P106) [4m] [10m] NX-E130 < > NS-P100 < > NS-P100 <...
  • Page 62 ● Secure placement or installation is the owner’s responsibility. images on a TV. In such a case, move this unit away from the TV YAMAHA shall not be liable for any accident caused by improper set. ● placement or installation of speakers.
  • Page 63 C130 speaker system and one SW-P130 subwoofer for reproducing higher quality super-bass sound. (Refer to system. page 12 for details on Advanced Yamaha Active Servo NS-P106 includes five NX-E130 speaker systems, one NX- Technology.) This super-bass sound adds a more C130 speaker system and one SW-P130 subwoofer realistic, theater-in-the-home effect to your stereo system.

  • Page 64: Setting Up The Speakers

    All manuals and user guides at all-guides.com SETTING UP THE SPEAKERS Before making connections, place all speakers in their respective positions. The positioning of the speakers is important because it controls the whole sound quality of this system. Place the speakers depending on your listening position by following the instructions below. Speaker configuration Placing speakers Main speakers:...

  • Page 65: Placing The Subwoofer

    All manuals and user guides at all-guides.com Placing the subwoofer It is recommended to place the subwoofer on the outside of either the right or the left main speaker. (See fig. Å .) The Å ı placement shown in fig. ı is also possible, however, if the subwoofer system is placed directly facing the wall, the bass effect may die because the sound from it and the sound reflected by the wall may cancel out each other.
  • Page 66 ● Do not affix the speakers to a wall using nails, adhesives, or any other unstable hardware. Long- Using the Yamaha Speaker Stand SPS-80 (option) term use and vibrations may cause the speakers to By using the Yamaha Speaker fall.
  • Page 67 (and rear center speaker for NS-P106) The following optional accessories are needed for mounting the speakers on commercially available speaker stands. * Inquire at your authorized YAMAHA dealer for the optional accessories. Mounting bracket (AAX34790) Screw (AAX12390) <...

  • Page 68: Connections

    All manuals and user guides at all-guides.com CONNECTIONS Caution: Plug in the subwoofer and other audio/video components after all connections are completed. An example of basic connections Main speakers Rear speakers Right Left Right Left Amplifier SPEAKERS MAIN REAR (SURROUND) WOOFER OUTPUT CENTER...

  • Page 69: How To Connect Speaker Cables

    NS-P106) to the speaker output terminal(s) of the amplifier. terminals of your amplifier with the provided speaker * To connect with a YAMAHA DSP amplifier (or AV cables. receiver), connect the SUBWOOFER (or LOW PASS * The provided speaker cables have labels marked etc.) terminal on the rear of the DSP amplifier (or AV...

  • Page 70: Using The Subwoofer (Sw-P130)

    All manuals and user guides at all-guides.com USING THE SUBWOOFER (SW-P130) Controls and their functions SUBWOOFER SYSTEM YST SW005 Port Front panel Rear panel VOLUME VOLUME AUTO STANDBY POWER HIGH INPUT /MONO AUTO STANDBY HIGH INPUT POWER /MONO 110V-120V VOLTAGE SELECTOR 220V-240V 220V-240V...

  • Page 71: Automatic-Power-Switching Function

    All manuals and user guides at all-guides.com Automatic power-switching function If the source being played is stopped and the input signal is * The power might turn on unexpectedly by sensing noise cut off for 7 to 8 minutes, the subwoofer automatically from other appliances.

  • Page 72: Frequency Characteristics

    All manuals and user guides at all-guides.com ● Once the volume balance between the subwoofer and Set the VOLUME control to minimum (0). the main speakers is adjusted, you can adjust the Turn on the power of all the other volume of your whole sound system by using the components.

  • Page 73: Advanced Yamaha Active Servo Technology (For Sw-P130)

    All manuals and user guides at all-guides.com ADVANCED YAMAHA ACTIVE SERVO TECHNOLOGY (for SW-P130) The theory of Yamaha Active Servo Technology has been By employing negative-impedance drive circuits, the based upon two major factors, the Helmholtz resonator and amplifier is able to generate precise, low-amplitude, low- negative-impedance drive.

  • Page 74: Troubleshooting

    Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instructions given below do not help, disconnect the power cord and contact your authorized YAMAHA dealer or service center.

  • Page 75: Specifications

    SPECIFICATIONS NX-E130, NX-C130 SW-P130 Type ..Full range acoustic-suspension speaker system Type ....Advanced Yamaha Active Servo Technology Magnetic shielding type Magnetic shielding type Driver ......5 cm (2”) full range cone speaker x 2 Driver ........16 cm (6-1/2”) cone woofer Nominal Input Power ..........
  • Page 76 YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA...
  • Page 77 All manuals and user guides at all-guides.com DVD / VIDEO CD / CD PLAYER DVD-S540 OWNER’S MANUAL STANDBY...
  • Page 78 All manuals and user guides at all-guides.com WARNING CAUTION To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. RISK OF ELECTRIC SHOCK CAUTION DO NOT OPEN Use of controls or adjustments or performance of CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
  • Page 79 - and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association's Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.
  • Page 80 LASER dangerous and may cause fire, damage to this Type Semiconductor laser GaAlAs unit, and/or personal injury. YAMAHA will not be Wave length 650 nm (DVD) held responsible for any damage resulting from 780 nm (VCD/CD)
  • Page 81 All manuals and user guides at all-guides.com Contents Introduction Picture CD & MP3 Playback Environmental Information ........2 General Operation..........12 Supplied accessories ..........2 MP3 & JPEG Navigator...........12 Notes about discs ............2 Play Mode ................12 Cleaning discs................2 Special JPEG Features..........13 Symbols Used in this Manual ........2 Function Introduction............13 Preview Function ...............13...

  • Page 82: Environmental Information

    All manuals and user guides at all-guides.com Introduction Thank you for purchasing this unit. This Owner’s Cleaning discs Manual explains the basic operation of this unit. When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out. The region code is 1 for U.S.A and Do not wipe in a circular motion.

  • Page 83: Functional Overview

    All manuals and user guides at all-guides.com Functional Overview Front and Rear Panels STANDBY/ON – to turn this unit to standby mode or – search forward* / go to the next chapter or track Disc Tray – search backward* / go to a previous / OPEN/CLOSE chapter or track –...

  • Page 84: Remote Control

    All manuals and user guides at all-guides.com Functional Overview Remote Control TOP MENU/RETURN – display the top-level disc menu – turn this unit ON or go to (DVD) / go back to previous standby-on mode menu (VCD) 0-9 numeric buttons MENU –...

  • Page 85: Preparation

    All manuals and user guides at all-guides.com Preparation Note: General Notes on connections – If the audio format of the digital output does not Never make or change connections with the match the capabilities of your receiver, the receiver power switched on. will produce a strong, distorted sound or no sound at all.

  • Page 86: Video Connections

    All manuals and user guides at all-guides.com Preparation S-Video terminal <A> Video Connections S (separate) video connection achieves a clearer If your AV receiver has video output jacks, picture than composite video connection by connect your receiver (and then to your TV) so separating color and luminance when transmitting that you can use one TV for several different signals.

  • Page 87: Inserting Batteries Into The Remote Control

    All manuals and user guides at all-guides.com Preparation Inserting batteries into the NTSC/PAL Conversion Remote Control This player is equipped with a NTSC/PAL conversion feature to convert the video output of 1 Open the battery cover by pressing in the tab, the disc to match your TV system.

  • Page 88: Operation

    All manuals and user guides at all-guides.com Operation 3 To go directly to any chapter/track, enter the Basic Playback chapter/track number using the numeric buttons 1 Press STANDBY/ON on the front panel to turn and press ENTER/OK. on the DVD player. Note: Long press of the ¡1 or 2™...

  • Page 89: Repeat And Shuffle

    All manuals and user guides at all-guides.com Operation Mono Right: Output the right audio channels OSD (On-Screen Display) of the disc through the left and right audio jacks. This function will provide some information about MIX-Mono: each of the audio jacks can output your playing disc on the screen.

  • Page 90: Zoom

    All manuals and user guides at all-guides.com Operation DVD VCD VCD SVCD Zoom SVCD Changing the Audio Language and/or format The Zoom function allows you to change the image size. Press AUDIO repeatedly to select the different 1 Press ZOOM to activate the function. languages.

  • Page 91: Preview Function

    All manuals and user guides at all-guides.com Operation Disc Interval Preview Function This function is used to divide a disc into six parts Press SCAN to enter previewing menu. by regular intervals and display them on one page Press 34 to highlight Track Digest, Disc Interval to help you preview the whole disc.

  • Page 92: Picture Cd & Mp3 Playback

    All manuals and user guides at all-guides.com Picture CD & MP3 Playback This player can playback JPEG format pictures and Play Mode MP3 files on a personally recorded CD-R/RW Auto Playback disc or commercial CD, and is compatible with If you choose WITHOUT MENU, the DVD Kodak Picture CD.

  • Page 93: Special Jpeg Features

    All manuals and user guides at all-guides.com Picture CD & MP3 Playback Playback with multi-angles Special JPEG Features When displaying one picture on TV screen Press 341 2 to get different effects. Function Introduction 3: Flip the picture vertically. Picture CD is a disc with a collection of JPEG 4: Flip the picture horizontally.

  • Page 94: Setup Menu

    All manuals and user guides at all-guides.com Setup Menu Program (not for Picture CD/MP3) Basic Operation 1 press 34 to choose “Program”. 1 Press SETUP in the STOP mode to enter the 2 Press 2 to move the cursor to the field of the Setup Menu.

  • Page 95: Osd Language

    All manuals and user guides at all-guides.com Setup Menu Repeat the program playback Audio Setup menu During playback of the programmed tracks, press There are items included in Audio Setup Page REPEAT. The programed tracks can be played such as “Speaker Setup”, “Digital Audio Setup”, again.

  • Page 96: Digital Audio Setup

    All manuals and user guides at all-guides.com Setup Menu Digital Audio Setup Equalizer (Sound Mode) In this menu, you can set up the digital audio The “Equalizer” allow you to select from various output signal from the digital jacks, such as coaxial preset modes that control the frequency bands of etc.

  • Page 97: Video Setup Menu

    All manuals and user guides at all-guides.com Setup Menu TV Display Video Setup menu There are items included in Video Setup menu such as “TV Type”, “TV Display”, “Closed Caption”, “Progressive” and “Picture Setting”. PANSCAN LETTERBOX 16:9 1 Press SETUP to enter the setup menu. 2 Press 1 2 to choose the VIDEO SETUP icon Select the aspect ratio of the TV to be connected.

  • Page 98: Closed Caption

    1 Press 34 to highlight “Closed Caption” in the This unit is compatible with the complete line of Video Setup menu. YAMAHA products, including the projectors DPX- 2 Enter its submenu by pressing 2. 1, DPX-1000, LPX-500 and the plasma monitor 3 Move the cursor by pressing 34 to highlight one option.

  • Page 99: Password Setup

    All manuals and user guides at all-guides.com Setup Menu Color (saturation) Password Setup 1 Press 34 to highlight “Color”. This item is used for the parental control and disc 2 Press 2 to open the level bar. lock. Enter your six digit password when a hint is 3 Press 1 2 to increase and decrease the color displayed on the screen.

  • Page 100: Preference Setup Menu

    All manuals and user guides at all-guides.com Setup Menu Disc Menu language Preference Setup menu DVD discs are available with multiple disc menu There are options included in this menu such as languages. This option is used to select the default “Audio”, “Subtitle”, “Disc Menu”, “Parental”, disc menu language.

  • Page 101: Parental Control

    All manuals and user guides at all-guides.com Setup Menu Parental Control Default Setup Movies on DVDs may contain scenes which are If problems occur while setting up the DVD not suitable for children. Therefore, discs may player, the “Default” function can be used to reset contain ‘Parental Control’...

  • Page 102: Troubleshooting

    Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer or service center.

  • Page 103: Specifications

    All manuals and user guides at all-guides.com Specifications PLAYBACK SYSTEM AUDIO PERFORMANCE DVD Video DA Converter 24bit Video CD & SVCD Signal-Noise (1 kHz) 105dB Dynamic range (1 kHz) 100dB PICTURE CD fs 96 kHz 2Hz- 44kHz CD-R, CD-RW fs 48 kHz 2Hz- 22kHz DVD+R, DVD+RW SVCD...

  • Page 104: Language Code

    All manuals and user guides at all-guides.com Language Code These pages can be used to select other languages.This does not affect the options in “Audio”, “Subtitle” or “Disc Menu”. Abkhazian 6566 German 6869 Afar 6565 Gikuyu; Kikuyu 7573 Afrikaans 6570 Greek, 6976 Albanian...
  • Page 105 All manuals and user guides at all-guides.com Language Code These pages can be used to select other languages.This does not affect the options in “Audio”, “Subtitle” or “Disc Menu”. Maori 7773 Sotho, Southem 8384 Marathi 7782 South Ndebele 7882 Marshallese 7772 Spanish;...
  • Page 106 YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN YAMAHA CORPORATION YAMAHA MUSIC AUSTRALIA PTY, LTD.

Table of Contents