Switch The Phone On And Off - Nokia RM-165 User Manual

from the AC-3 or AC-4 charger. The charge level of the phone battery is
indicated on the phone display.
The white indicator light around the bottom of the desk stand shows the
charging status of the inserted spare battery:
• The light pulsates slowly when the desk stand is empty, when only
the phone is inserted (the phone battery is fully charged or being
charged), or when both the phone and the spare battery are inserted,
and the spare battery is fully charged.
• The light is continuously on when the spare battery is being charged.
The spare battery will be charged if the phone is not inserted, or if
the phone battery is fully charged.
• To turn the light on or off, press and hold the button on the back of
the desk stand.
• If the light is not shown even though you have not turned it off by
pressing the button, the charger connected to the desk stand may
not be compatible or the spare battery temperature may be too high.
Check the compatibility of the charger, and use only compatible
Nokia chargers. If the spare battery temperature is too high, it will
not be charged. When the temperature of the spare battery returns
to normal, charging starts, and the light turns on again.

■ Switch the phone on and off

Warning: Do not switch the phone on when wireless phone use is
prohibited or when it may cause interference or danger.
Press and hold the power key as shown.
If the phone asks for a PIN or a UPIN code, enter the
code (for example, displayed as ****), and select OK.
When you switch on your phone for the first time, and
the phone is in the standby mode, p. 20, you are asked to
get the configuration settings from your service provider
(network service). Confirm or decline the query. See Connect to service
provider support, p. 65, and "Configuration settings service," p. 11.
G e t s t a r t e d
17