Contents Thank you for Important Safety Instructions purchasing Getting Started the Shark ® Using the Vacuum Navigator ™ Cleaning with the Vacuum Accessories Professional. Emptying the Dust Cup Assembly Proper Care of Your Vacuum Troubleshooting Checking for Blockages Maintenance Warranty and Registration...
IMPORTANT SAFETY INSTRUCTIONS For Household Use Only WARNING: WHEN USING YOUR SHARK NAVIGATOR PROFESSIONAL VACUUM, ® TO REDUCE THE RISK OF FIRE, ELECTRIC BASIC SAFETY PRECAUTIONS SHOULD SHOCK OR INJURY: ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING: GENERAL ELECTRICAL SAFETY: READ ALL INSTRUCTIONS BEFORE 1.
Page 5
DUST CUP/FILTERS/ACCESSORIES: HOSE ATTACHMENTS: 1. DO NOT use if air flow is restricted; if the air Before turning on the vacuum: paths, the hose, or the accessories become 1. Make sure that all filters are thoroughly dry blocked, turn the vacuum cleaner off. Remove after routine cleaning.
Getting Started Your Shark Navigator Secure the handle assembly in ® Professional is easy to place with included bolt. assemble: WHAT’S IN THE BOX YOU JUST Place the vacuum in the upright OPENED: Lay your vacuum body on a position.
Page 7
Attach the Super Stretch Hose: To store the vacuum: To carry the vacuum: Snap hose into swivel When storing your vacuum, With the unit in the standing connector wind the cord around the two position, lift by the Dust Cup cord holders and secure with Assembly Handle (carry handle).
Floor Power Nozzle. Power Switch Settings Suction Release Bare Floors / Tools Carpets Your Shark Navigator Press the On/Off switch to the“I" ® IMPORTANT: Professional Vacuum can be used to position to vacuum bare floors or Your Brushroll Indicator Light clean bare floors or carpets –...
Cleaning with the Vacuum Accessories Using the Cleaning Wand: Stand the vacuum into upright position. Remove the Cleaning Wand with handle (with hose attached) from the unit. Push the selected tool into the end of the Cleaning Wand. Vacuum Accessories Before cleaning with your For a longer reach, add the extra accessories:...
Option A: For Quick Empty: before continuing to vacuum; Locate the Dust Cup Door Insert Dust Cup deep inside Shark advanced cyclonic ® release button within the trash trash receptacle to contain dust action will sweep the metal bag and press to release as you and debris.
COMPONENT MAINTENANCE SCHEDULE Dust Cup Empty each time you vacuum. Pre-Motor Foam Filter Rinse and air dry every month under normal use. Pre-Motor Felt Filter Rinse and air dry every month under normal use. Post-Motor HEPA Filter Clean every 2 years under normal use. DO NOT operate the vacuum without ALL the filters in place.
Troubleshooting WARNING: To reduce the risk of electric shock, the power cord must be disconnected before performing maintenance/troubleshooting checks. PROBLEM POSSIBLE REASONS & SOLUTIONS Check filters to see if they need cleaning. Follow instructions for rinsing and drying the filters before re-inserting back into the vacuum. (See “Maintenance”...
Checking for Blockages Unplug the vacuum before checking for blockages. Dust Cup Air Duct: Floor Power Nozzle Hose Connector: Reassemble all parts Stand vacuum into upright securely before position. Lay vacuum flat. operating vacuum. Remove Dust Cup Assembly and Remove Nozzle Hose and check empty Dust Cup if necessary.
Maintenance Rotating Brush Cleaning the Motorized Floor Resetting the Motor Thermostat Brush Your Shark Navigator ® When your motorized floor brush Professional Vacuum is equipped needs cleaning or locks onto an with a protective Motor Thermostat. object, it automatically shuts...
We recommend you insure the package (as damage in shipping is not covered by your warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”. Product Registration Please visit www.registeryourshark.com or call 1-866-694-6401 to register your new Shark product within ®...
Page 16
Illustrations may differ from actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice. For SharkNinja U.S. Patent information visit http://www.sharkninja.com/USPatents. Shark and Shark Navigator are registered trademarks of SharkNinja Operating LLC. NV80SHER_31_IB_E_161018_1...