Video Screen Options - Dell D10U003 Setup And Specifications Manual

Option
Drives
Smart Reporting
USB Configuration
Front USB Configuration
Rear USB Configuration
USB PowerShare
Audio
Dust Filter Maintenance

Video screen options

Table 20. Video
Option
Primary Display
Description
• AHCI = SATA is configured for AHCI mode
• RAID ON = SATA is configured to support RAID mode (selected by default)
Allows you to enable or disable the various drives on-board:
• SATA-0 (enabled by default)
• SATA-1 (enabled by default)
• M.2 PCIe SSD-0 (enabled by default)
This field controls whether hard drive errors for integrated drives are reported during system startup.
The Enable Smart Reporting option is disabled by default.
Allows you to enable or disable the integrated USB controller for:
• Enable USB Boot Support
• Enable Front USB Ports
• Enable Rear USB Ports
All the options are enabled by default.
Allows you to enable or disable the front USB ports. All the ports are enabled by default.
Allows you to enable or disable the back USB ports. All the ports are enabled by default.
This option allows you to charge the external devices, such as mobile phones, music player. This
option is disabled by default.
Allows you to enable or disable the integrated audio controller. The option Enable Audio is selected by
default.
• Enable Microphone
• Enable Internal Speaker
Both the options are selected by default.
Allows you to enable or disable BIOS messages for maintaining the optional dust filter installed in your
computer. BIOS will generate a pre-boot reminder to clean or replace the dust filter based on the
interval set. The option Disabled is selected by default.
• Disabled
• 15 days
• 30 days
• 60 days
• 90 days
• 120 days
• 150 days
• 180 days
Description
Allows you to select the primary display when multiple controllers are available in the system.
• Auto (default)
System setup 19