Removing And Installing The Cowling And Panel - Yamaha XMAX BUSINESS Edition 2010 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Removing and installing the
cowling and panel
1. Cowling A
2. Panel
6
1. Panel A
The cowling and panel shown above
need to be removed to perform some
of the maintenance jobs described in
this chapter. Refer to this section
EAU18740 each time a cowling or panel needs to
be removed and installed.
Cowling A
To remove the cowling
1. Remove the panel by pushing it
out from the back side of the
cowling as shown.
2. Remove the screws, and then
pull the cowling off as shown.
1. Cowling A
EAUS1790
1. Cowling A
To install the cowling
1. Place the cowling in the original
2. Install the panel by pushing it in.
Panel A
To remove the panel
1. Open the seat. (See page 3-17.)
2. Remove the screws, and then
TIP
For the Business version, the rear
carrier and travel trunk are not shown
for better understanding.
6-8
position, and then install the
screws.
pull the panel outward.
EAUS2030