Advertisement
Encore FR20 DTW
Introduction
Unpacking: Thank you for purchasing the Encore FR20 DTW by ADJ Products, LLC. Every Encore
FR20 DTW has been thoroughly tested and has been shipped in perfect operating condition. Carefully
check the shipping carton for damage that may have occurred during shipping. If the carton appears
to be damaged, carefully inspect your fixture for any damage and be sure all accessories necessary
to operate the unit has arrived intact. In the case damage has been found or parts are missing, please
contact our toll free customer support number for further instructions. Do not return this unit to your
dealer without first contacting customer support.
Introduction: The ADJ Encore FR20 DTW is a high powered LED fresnel fixture. This fixture is used in a
stand alone set up. The Encore FR20 DTW has one operating mode: manual dimmer control. Please
read the instructions carefully to familiarize yourself with the basic operation of this unit. These instructions
contain important safety information regarding the use and maintenance of this unit. Please keep this
manual with the unit, for future reference.
Customer Support: Contact ADJ Service for any product related service and support needs. Also
forums.adj.com
visit
with questions, comments or suggestions.
ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST
Voice: 323-582-2650 | Fax: 323-832-2941 | support@adj.com
ADJ SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET
Voice: +31 45 546 85 60 | Fax: +31 45 546 85 96 | support@adj.eu
Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or
moisture.
Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself,
doing so will void your manufactures warranty. In the unlikely event your unit may require service
please contact ADJ Products, LLC.
PLEASE recycle the shipping carton when ever possible.
ADJ Products, LLC - www.adj.com - Encore FR20 DTW User Manual Page 3
Advertisement
