Table of Contents
Advertisement
6. Remove the two screws that secure the optical drive, and then slide it out of the front of the computer.
Figure 15. Removing the optical drive
7. Slide the new optical drive into the optical drive bay from the front of the computer until the screw holes
in the optical drive align with the corresponding screw holes in the chassis.
Figure 16. Installing the optical drive
8. Install the two screws to secure the optical drive to the chassis.
Figure 17. Installing the optical drive screws
9. Connect the signal cable and the power cable to the new optical drive.
.
Chapter 7
Installing or replacing hardware
53
Advertisement
Table of Contents
