AEG LR9696C6 User Manual page 24

24 www.aeg.com
10.3 Pouring salt
The water softener function acts through
special resins present in the appliance.
To regenerate the resins and make them
ready to soften the water pour a special
salt in the compartment
1. Open the detergent dispenser.
2. Open the compartment
3. Pour the special salt.
4. Close the salt compartment and the
detergent dispenser.
Regularly check if there is
enough salt.
Salt
:
Salt
.
Salt
The compartment
600 gr of salt that are sufficient for about
two months if the default water hardness
level (C04) is set and the water softener
is activated during wash phase only. A
different water hardness level or different
setting may increase or decrease the salt
consumption. Refer to 'How to set the
water hardness level' and 'How to set the
water softener also during rinse phase'.
The display shows the indicator
Salt
compartment needs to be refilled with
salt, even if a little salt still remains.
WARNING!
Pour the salt in the
compartment
WARNING!
Do not put anything but salt
in the compartment
any other detergent/additive
is poured inadvertently in
this compartment, please
refer to 'Eliminating
detergent or other additives
from salt compartment' in
'Troubleshooting' chapter.
Only use special salt for
dishwasher and/or washing
machine. The proper salt
can be ordered from the web
site!
Other types of salts are less
efficient and over time could
damage the water softener
technology permanently.
WARNING!
Do not use fine
salt!
can contain about
when
Salt
only.
Salt
. If