LG LMV1813ST Service Manual page 37

B. REMOVING THE OUT CASE(Figure 8)
(1) Remove the vent grille by removing two screws
securing it to the outer case.
(2) Remove two screws securing it to the air duct.
(3) Remove the mounting plate by turning the screws
(1 or 2 screws) securing it to the outer case.
(4) Remove two screws on the left central edge and
two screws on the right central edge of the base
plate.
Remove the fan bracket from the outer case by
removing one screw securing it to the outer case.
(5) Remove four screws of the rear cavity.
(6) Remove the outcase with disconnecting power
cord connector.
Figure 8
-37-
Fan Bracket
Power Cord