Table of Contents
Advertisement
Data services
Default setting and activation of the
connection profiles for
applications. The phone default set-
ting varies from service provider to
service provider. Consult your serv-
ice provider or go to this address on
the Internet for more information
www.siemens.com/
mobilephonescustomercare
in the "FAQ" section.
HTTP profile
The phone default setting varies
from service provider to service pro-
vider. Consult you service provider
or go to this address on the Internet
for more information
www.siemens.com/
mobilephonescustomercare
in the "FAQ" section.
Authentication
Activate or deactivate encrypted
dial-up (CSD connections only) for
Internet access.
Fax/data
Send voice/fax
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
MMS, WAP
b
Rec. voice/fax
Start the required communication
program on your PC and activate the
function on the phone during the call
(the PC will take over the connec-
tion).
Rec. fax/data
The call is signalled by a special ring-
tone and the type of call (fax or data)
is displayed in the phone display.
Now start the communication pro-
gram on your PC to receive the
fax/data.
Security
¢
¢
Security
C
T
¢
Select function.
Auto key lock
The keypad is locked automatically if
no key has been pressed for one
minute in standby mode. This pre-
vents the phone from being used
accidentally. However, you can still
be called and you can still make an
emergency call.
Additional information
Block/unblock in standby mode. In each
case:
Press and hold.
#
Setup
47
b
Advertisement
Table of Contents
