Specifications - Krell Industries KMA-i800 Owner's Reference Manual

KMA-i800 Owner's Reference

Specifications

Analog Inputs
1 balanced via XLR connector
1 single-ended via RCA connector
Outputs
2 pr. speaker outputs via gold-plated binding posts
Control inputs
1 Ethernet via RJ45
1 12 VDC trigger input via 2-conductor 3.5 mm connector
Input impedance
Balanced: 28 kΩ
Single-ended: 14 kΩ
Frequency response
20 Hz to 20 kHz +0, -0.13 dB
-3dB bandwidth 147kHz (measured at 50W into 8Ω)
Signal-to-noise ratio
>109 dBr, wideband, unweighted, referred to full power output
>120 dBr, "A"-weighted
Gain
26.5 dB
Input Sensitivity
3.8 V RMS
Total harmonic distortion
<0.010%, 1 kHz, 800W, 8Ω load
<0.035%, 20 kHz, 800W, 8Ω load
Output power
800W RMS at 8Ω
1600W RMS at 4Ω
Output voltage
245 V peak to peak
86 V RMS
Output current
56 A peak
Slew rate
35 V/µs
Output impedance
0.009 Ω, 20 Hz
0.018 Ω, 1 kHz
Damping factor
>800, 20 Hz referred to 8 Ω
>400, 1kHz referred to 8 Ω
© 2023 by Krell Industries LLC. All rights reserved. Page 12 of 15