Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Harbor Freight Tools Manuals
  4. Jacks
  5. PITTSBURGH 64879
  6. Owner's manual & safety instructions

Harbor Freight Tools PITTSBURGH 64879 Owner's Manual & Safety Instructions

Automative heavy duty 3 ton floor jack with rapid pump
Hide thumbs

Advertisement

Quick Links

Download this manual
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Item
Weight Capacity
Maximum Height
Minimum Height
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2018 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
64879
3 Tons (6,000 lb.)
19-5/8"
3"
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
18i

Advertisement

loading

Related Manuals for Harbor Freight Tools PITTSBURGH 64879

Summary of Contents for Harbor Freight Tools PITTSBURGH 64879

  • Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.

  • Page 2: Table Of Contents

    table of contents Safety ............2 Maintenance ..........6 Setup ............3 Parts List and Assembly Diagram....7 Operation ............ 4 Warranty ............. 8 WarnInG SyMBOLS anD DEFInItIOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

  • Page 3: Safety

    Setup - Before use: read the EntIrE IMpOrtant SaFEty InFOrMatIOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. note: For additional information regarding the parts listed in the following pages, refer to Parts List and Assembly Diagram on page 7.

  • Page 4: Operation

    Operating Instructions read the EntIrE IMpOrtant SaFEty InFOrMatIOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tool Set up attaching the Handle cautIOn! the Handle socket may be held 1.
  • Page 5 General Operating Instructions Lifting park vehicle on a flat, level, solid, surface safely away from oncoming traffic. turn off the vehicle’s engine. place the vehicle’s transmission in “parK” (if automatic) or in its lowest gear (if manual). Set the vehicle’s emergency brake. then, chock the wheels that are not being lifted. 1.

  • Page 6: Maintenance

    Maintenance and Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. tO prEVEnt SErIOuS InJury FrOM tOOL FaILurE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. cleaning, Maintenance, and Lubrication 1.

  • Page 7: Parts List And Assembly Diagram

    parts List and assembly Diagram part Description part Description Retaining Ring (M20) Set Screw Washer (M20) Upper Handle Front Wheel Lower Handle Frame Handle Lock Button Nut (M16) U-Joint Washer (M16) Hydraulic Unit Screw (M5X12) Spring Rear Caster Assembly Retaining Ring (M22) Screw (M10X20) Hydraulic Unit Adaptor Washer (M10)

  • Page 8: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.