Harbor Freight Tools Pittsburgh 56736 Owner's Manual
  1. Manuals
  2. Brands
  3. Harbor Freight Tools Manuals
  4. Jacks
  5. Pittsburgh 56736
  6. Owner's manual

Harbor Freight Tools Pittsburgh 56736 Owner's Manual

20 ton heavy duty bottle jack
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
20 TON HEAVY DUTY BOTTLE JACK
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
21a
56736

Advertisement

Table of Contents
loading

Related Manuals for Harbor Freight Tools Pittsburgh 56736

Summary of Contents for Harbor Freight Tools Pittsburgh 56736

  • Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.

  • Page 2: Specifications

    Specifications Weight Capacity 20 Tons (40,000 lb.) Max Height 17-3/8" Min. Height 9-1/4" Base Dimensions 6-1/8" x 5-1/2" WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
  • Page 3 Jack. These carry important information. If unreadable or missing, contact 29. The warnings, precautions, and Harbor Freight Tools for a replacement. instructions discussed in this manual cannot cover all possible conditions 20. Before use, read manufacturer’s and situations that may occur.
  • Page 4 Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. Bleeding IMPORTANT! Before first use, check Carefully use a flat dull-sided edge to for proper hydraulic oil level in the push down the top inside rim of the Oil Jack.
  • Page 5 Lifting Place the Handle in the Fulcrum and pump WARNING! TO PREVENT SERIOUS until the top of the Jack’s Saddle has INJURY: Set Jack on a flat, level, solid, nearly reached the vehicle lifting point. ground surface. If using with vehicle, set safely away from oncoming traffic Saddle and turn off vehicle’s engine.
  • Page 6 Lowering Remove all tools, parts, etc. Saddle from under the vehicle. Position the Saddle under the lifting point. Place Handle over Release Valve and turn the Handle firmly clockwise to close the Release Valve. Move the Handle to the Fulcrum and pump to raise the vehicle slightly above the saddle(s) of the jack stand(s).

  • Page 7: Maintenance And Servicing Instructions

    Maintenance and Servicing Instructions Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. Cleaning, Maintenance, and Lubrication Before each use, inspect the general Change the hydraulic oil at least...

  • Page 8: Troubleshooting

    Troubleshooting TO PREVENT SERIOUS INJURY: Use caution when troubleshooting a malfunctioning jack. Stay well clear of the supported load. Completely resolve all problems before use. If the solutions presented in the Troubleshooting guide do not solve the problem, have a qualified technician inspect and repair the jack before use.

  • Page 9: Please Read The Following Carefully

    PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.

  • Page 10: Parts List And Diagram

    Parts List and Diagram Parts List Part Description Part Description Screw Cover Pump Body Cylinder Safety Valve Shield Ring O-Ring Oil Fill Plug Spring Ball Cup Oil Tank Guide Ring Steel Ball Ø4 O-Ring Release Valve Piston O-Ring Rectangular Circle Bowl Washer Steel Ball Ø6 Base...

  • Page 11: Assembly Diagram

    Assembly Diagram ITEM 56736 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents