Table of Contents
Advertisement
Connectivity
¢
¢
Connectivity
C
T
¢
Select function.
GPRS
(General Packet Radio Service)
GPRS is a method for transmitting
data faster in the mobile network.
For symbols in the display see p. 6.
GPRS info
Display connection information.
IrDA
The distance between two devices
must not exceed 30 cm. The infrared
windows in both appliances must be
aligned as accurately as possible
with each other. For symbols in the
display see p. 6.
Data services
Default setting and activation of the
connection profiles for
applications. The phone default set-
ting varies from service provider to
service provider. Consult your serv-
ice provider or go to this address in
the Internet for more information
www.siemens.com/
mobilephonescustomercare in the FAQ
section.
b
MMS, WAP
HTTP profile
The phone default setting varies
from service provider to service pro-
vider. Consult you service provider
or go to this address on the Internet
for more information
www.siemens.com/
mobilephonescustomercare in the FAQ
section.
Authentication
Activate or deactivate encrypted
WAP dial-up (CSD connections only).
Security
¢
¢
Security
C
T
¢
Select function.
Auto key lock
The keypad is locked automatically if
no key has been pressed for one
minute in standby mode. This pre-
vents the phone from being used
accidentally. However, you can still
be called and you can still make an
emergency call.
Additional information
Block/unblock in standby mode.
In each case:
Press and hold.
#
Setup
51
Advertisement
Table of Contents
