Telephone Helpline: 1300225960 Safety Instructions Please take a few moments to carefully read through this manual. Correct maintenance and operation of this machine will provide the best possible performance from your POLAR product. • Position on a flat, stable surface. •...
Telephone Helpline: 1300225960 Pack Contents Location • The appliance is intended for indoor use only. • Be sure the location chosen has a floor strong The following is included: enough to support the total weight of the cabinet and contents. A fully loaded unit can •...
Page 5
Telephone Helpline: 1300225960 Connection 4. Insert the beer line into the cabinet via the hole. Then insert the air conduct hose into the beer tower. Connecting the beer tower 1. Pull out the air conduct hose from the hole in the cabinet surface.
Page 6
Telephone Helpline: 1300225960 8. In case the beer tower is not stable, you can adjust the tap as needed. Open the top cap of the beer tower first. Then use the supplied spanner to adjust the tap. Spanner Connecting the CO2 cylinder and beer keg Note: The diagram below is for reference only.
Page 7
Telephone Helpline: 1300225960 Beer keg layout: Model GE632-A Warning: • Make sure that all fittings in system are tight. Always keep the CO cylinder in vertical position. The recommended pressure for the CO system is 8-10 psi. • Always handle the CO cylinder with care.
Telephone Helpline: 1300225960 Operation Beer keg layout: Model GE633-A Control Panel For GE632-A: The control panel is located on the rear wall inside the cabinet. For GE633-A: The control panel is located on the front of the appliance. To lock/unlock the keyboard, press together for more than 3 seconds.
Telephone Helpline: 1300225960 Serving If the buildup on the coil consists of only light dust and debris the condenser coil can be cleaned with • Before serving, ensure to locate the drip tray(s) a simple brush. Heavier dust buildup may require in place.
Telephone Helpline: 1300225960 Gasket Maintenance Gaskets require regular cleaning to prevent mould and mildew buildup and also to keep the elasticity of the gasket. Gasket cleaning can be done with the use of warm soapy water. Avoid full strength cleaning products on gaskets as this can cause them to become brittle and prevent proper seals.
Technical Specifications Temperature Dimensions Weight Model Voltage Power Current Refrigerant Range H x W x D mm (kg) GE632-A 220-240V~ 150W 1.1A 2°C ~ 8°C R600a (55g) 1312 x 612 x 50Hz GE633-A 250W 1.6A 2°C ~ 8°C R290 (95g) 1438 x 1247 x GE632-A_GE633-A_A5_v1_20211229.indb 11...
Telephone Helpline: 1300225960 Electrical Wiring The plug is to be connected to a suitable mains socket. This appliance is wired as follows: • Live wire (coloured brown) to terminal marked L • Neutral wire (coloured blue) to terminal marked N •...
DocuSign Envelope ID: 078D50A1-9FDA-4B71-B961-A3068D79EA34 DECLARATION OF CONFORMITY • Conformiteitsverklaring • Déclaration de conformité • Konformitätserklärung • Dichiarazione di conformità • • Declaración de conformidad • Declaração de conformidade Equipment Type • Uitrustingstype • Type d'équipement • Gerätetyp Model • Modèle • Modell • Modello •...