Sharp YO-190P Operation Manual page 27

3. Press on the receiving Organizer to
2
select "2: RECEIVE".
4. Press on the transferring Organizer
1
to select "1: SEND".
Data transfer is started.
• To interrupt data transfer, press
Messages are displayed on the respective Organizers while data is being
transferred.
Transferring Organizer
Receiving Organizer
When these messages are no longer displayed, the data transfer is
completed.
To verify the listing after it has been
transferred, press ("3: VERIFY") on
3
the receiving Organizer in step 3.
If any discrepancies are found, "VERIFY ERROR !" is displayed.
3.Transferring Data to Make a Backup File
All data in the Organizer can be transferred to the same model of the
Organizer.
1. Press
MENU
NEXT NEXT
<
UNIT TO UNIT
RECEIVING
MODE
.
ON
<
UNIT TO UNIT
–SENDING–
<
UNIT TO UNIT
–RECEIVING–
<
UNIT TO UNIT
–VERIFYING–
on both the Organizers.
NEXT
> 2. Press 5 on the receiving Organizer to
select "5: RESTORE".
3. Press on the transferring Organizer
4
to select "4: BACKUP".
A confirmation message is displayed.
4. Press in answer to the
Y
confirmation message on the
transferring Organizer.
>
Backup data transfer is started.
Messages are displayed on the
respective Organizers while the data is
>
being transferred. When these
messages are no longer displayed, the backup data transfer is
completed.
Make sure you really want to delete all the data in the receiving Organizer
before executing the "RESTORE" function. Once you start the restoration
process, all the data in the receiving Organizer will be deleted, even if
>
you cancel the restoration process.
< >
UNIT TO UNIT
BACKUP
RECEIVING
MODE
< >
UNIT TO UNIT
BACKUP
SEND
OK ? Y/N
< >
UNIT TO UNIT
–SENDING–
< >
UNIT TO UNIT
–RECEIVING–
25