Empire Comfort Systems DVP42DP31-2 Installation Instructions And Owner's Manual page 16

VENTING FIREPLACE - TOP (continued)
Installation of Flue Heat Shield
1. Remove flue insulation.
2. Remove (2) screws on outside of inlet vent adapter.
See Figure 20.
3. Lift top shield placing flue heat shield around flue.
4. Replace (2) screws on outside of inlet vent adapter.
See Figure 21.
5. Bend tab at top front of flue heat shield if necessary to maintain
air gap between flue pipe and flue heat shield.
6. Replace flue insulation.
Page 16
Figure 20
HOLES FOR 42" MODELS
TAB
HOLES FOR 36" MODELS
NOTE: 42" MODEL SHOWN
Figure 21
26928-0-0110