Konica Minolta bizhub 650i Quick Manual page 41

4.1 Optional components
No. Name
26 Finisher FS-539
27 Finisher FS-539 SD
28 Punch Kit PK-524
29 Relay Unit RU-513
30 Finisher FS-540 SD
31 Finisher FS-540
32 Punch Kit PK-526
33 Z Folding Unit ZU-609
34 Post Inserter PI-507
35 Job Separator JS-602
List of other optional components
The following options are built into this machine and are not shown in the figure.
No. Name
1 Stamp Unit SP-501
2 Spare TX Marker
Stamp 2
3 Local Interface Kit
EK-609
4 i-Option LK-102
5 i-Option LK-105
6 i-Option LK-106
7 i-Option LK-107
8 i-Option LK-108
bizhub 650i/550i/450i
Description
Sorts, groups and staples printed paper before outputting it.
To install the Finisher FS-539, the Relay Unit RU-513 is required. In
addition, the Paper Feed Cabinet PC-116, PC-216, PC-416, or
PC-417 or Desk DK-516 must be installed on this machine.
Sorts, groups, staples, folds, and binds printed paper before output-
ting it.
To install the Finisher FS-539 SD, the Relay Unit RU-513 is required.
In addition, the Paper Feed Cabinet PC-116, PC-216, PC-416, or
PC-417 or Desk DK-516 must be installed on this machine.
Install this unit onto the Finisher FS-539/FS-539 SD.
This unit supports the punching function.
This unit is required to install the Finisher
FS-540/FS-540 SD/FS-539/FS-539 SD on this machine.
Sorts, groups, staples, folds, and binds printed paper before output-
ting it.
To install the Finisher FS-540 SD, the Relay Unit RU-513 is required.
In addition, the Paper Feed Cabinet PC-116, PC-216, PC-416, or
PC-417 or Desk DK-516 must be installed on this machine.
Sorts, groups and staples printed paper before outputting it.
To install the Finisher FS-540, the Relay Unit RU-513 is required. In
addition, the Paper Feed Cabinet PC-116, PC-216, PC-416, or
PC-417 or Desk DK-516 must be installed on this machine.
Install this unit onto the Finisher FS-540/FS-540 SD.
This unit supports the punching function.
Install this unit onto the Finisher FS-540/FS-540 SD.
This unit is used for Z-folding.
Install this unit onto the Finisher FS-540/FS-540 SD.
This unit inserts cover paper between the copied or printed sheets.
The finisher can also be operated manually (only the lower tray is
available).
Install this unit onto the Finisher FS-540/FS-540 SD.
This unit sorts printed sheets.
Description
Stamps a scanned original when sending a fax. This unit allows you
to check that the original has been scanned.
A replacement stamp for the Stamp Unit SP-501.
Install this unit when using the connection function with a Bluetooth
LE-compatible iOS terminal.
The speaker, USB port, and receiving device for Bluetooth LE com-
munication are added.
Allows you to add the PDF processing function.
Allows you to add the searchable PDF function.
Used to add a bar code font that is one of special fonts.
Used to add a unicode font that is one of special fonts.
Used to add an OCR font that is one of special fonts.
In the standard, the OCR-B font (PostScript) is available. Installing this
option allows a use of the OCR-A font (PCL).
4
4-5