Installing The System Into A Rack; Identifying The Sections Of The Rack Rails - Supero SUPERSERVER 2027TR-HTRF+ User Manual

SUPERSERVER 2027TR-HTRF+/H70RF+/H71RF+/H72RF+ User's Manual
2-5

Installing the System into a Rack

T h i s s e c t i o n
2027TR-HTRF+/H70RF+/H71RF+/H72RF+ into a rack unit with the rails provided.
There are a variety of rack units on the market, which may mean that the assembly
procedure will differ slightly from the instructions provided. You should also refer to
the installation instructions that came with the rack unit you are using. NOTE: This
rail will fi t a rack between 26.5" and 36.4" deep.

Identifying the Sections of the Rack Rails

The chassis package includes two rail assemblies in the rack mounting kit. Each
assembly consists of three sections: An inner chassis rail which secures directly to
the chassis, an outer rail that secures to the rack, and a middle rail which extends
from the outer rail (see Figure 2-1). These assemblies are specifi cally designed for
the left and right side of the chassis.
Figure 2-1: Identifying the Outer Rail, Middle Rail and Inner Rails
Rail Assembly
(Shown with Rails
Retracted)
This Side Faces
p r o v i d e s i n f o r m a t i o n
(Left Rail Assembly Shown)
Outward
2-4
o n i n s t a l l i n g
Outer Rail
Middle Rail
Locking Tab
Inner Rail
t h e