Sym FIDDLE 125 Service Manual page 174

SYM 16. ELECTRICAL EQUIPMENT
Starting Motor Removal
Bolts x2
Remove the right side cover. (screws x3)
Firstly, remove the battery negative (-)
terminal, and then remove the positive (+)
terminal.
Remove the luggage box.
Remove the starting motor power wire.
Remove the starting motor mounting bolts
and motor.
Starting Motor Installation
Install the motor in reverse order of removal.
METER
Removal
Remove the front handle cover.
Meter
speedometer cable
Remove the speedometer cable.
Meter connector
Remove the front cover.
Remove the power connector of the meter.
16-15