Samsung SyncMaster 3 Series User Manual page 26

Basic Features
Sound Systems, Etc.
¦
MENUm → Sound → ENTERE
Broadcast Audio Options
Audio Language
■

(digital channels only)

Change the default value for audio languages.
✎
The available language may differ depending on the
broadcast.
Audio Format
■

(digital channels only)

Select the audio format.
Audio Description
■

(not available in all locations) (digital
channels only)

This function handles the Audio Stream
for the (Audio Description) which is
AD
sent along with the Main audio from the
broadcaster.
✎
Audio Description (Off / On): Turn
the audio description function on
or off.
✎
Volume: Adjust the audio description volume.
Additional Settings
(digital channels only)
DTV Audio Level (MPEG / HE-AAC): This function allows
■
you to reduce the disparity of a voice signal (which is one
of the signals received during a digital TV broadcast) to a
desired level.
✎
According to the type of broadcast signal, MPEG /
HE-AAC can be adjusted between -10dB and 0dB.
✎
To increase or decrease the volume, adjust between
the range 0 and -10 respectively
Dolby Digital Comp (Line / RF): This function minimizes
■
signal disparity between a dolby digital signal and a voice
signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
✎
Select Line to obtain dynamic sound, and RF to
reduce the difference between loud and soft sounds
at night time.
Line: Set the output level for signals greater or less than
-31dB (reference) to either -20dB or -31dB.
RF: Set the output level for signals greater or less than
-20dB (reference) to either -10dB or -20dB.
Speaker Settings
Auto Volume (Off / Normal / Night): To equalize the
■
volume level on each channel, set to Normal.
Night: This mode provides an improved sound experience
compared to Normal mode, making almost no noise. It is
useful at night.
Reset Sound (Yes / No)
Reset all sound settings to the factory defaults.
Selecting the Sound Mode
¦
When you set to Dual fg, the current sound mode is displayed
on the screen.
Audio
Type
Mono
A2
Stereo
Stereo
Dual
Mono
NICAM Stereo
Stereo
Dual
✎
If the Stereo signal is weak and an automatic switching,
occurs, then switch to the Mono.
✎
Only activated in stereo sound signal.
✎
Only available when the input Source is set to TV.
t
Dual f-g Default
Mono
Automatic
change
Stereo ↔ Mono
Dual f ↔ Dual g
Dual f
Mono
Automatic
change
Mono ↔ Stereo
Mono ↔ Dual f
Dual f
 Dual g 
English
26